Electric Vehicle Battery Management System (BMS) Training Platform Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13534
Indian Lab Suppliers supplies the Electric Vehicle Battery Management System (BMS) Training Platform (Product ID: 13534) as part of its electronics engineering lab equipment range. It is a working lithium iron phosphate battery pack with its battery management system, on-board charger and DC/DC converter, laid out for teaching.
Quick Answer
The pack uses 24 lithium iron phosphate cells of 3.2 V in series for a nominal 76.8 V. The BMS reads 4 temperature channels, switches 3 relay channels, balances cells at 100 mA and reports over CAN, with data shown on a 10-inch touch screen. An on-board charger (85–265 V AC in, 48–96 V DC out, over 95% efficient) and a DC/DC converter (48–96 V DC in, 13.8 V DC out, over 88% at full load) complete the system. A mode 2 charging gun and AC charging inlet are included; please confirm the connector standard at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Battery | Lithium iron phosphate, 24 cells in series, 3.2 V per cell |
| Pack nominal voltage | 76.8 V |
| BMS | 3 relay channels, 4 temperature channels, 100 mA balancing |
| On-board charger | 85–265 V AC in, 48–96 V DC out, >95% efficiency |
| DC/DC converter | 48–96 V DC in, 13.8 V DC out, >88% at full load |
| Display | 10-inch touch screen |
| Communication | CAN |
| System voltage | 12 V DC (12 V starter battery) |
| Other parts | Charge and discharge relays, discharge resistor, manual service disconnect, Hall current sensor, ignition switch |
Where This Is Used
It teaches pack monitoring, cell balancing, pre-charge and charging logic, and pairs with the New Energy Vehicle Battery Pack Test Training Platform (Product ID: 13542) and the New Energy Vehicle Power Battery BMS Management and AC/DC Charging Teaching Platform (Product ID: 13543). Pull the manual service disconnect and use insulated tools before touching the 76.8 V pack. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What is the pack voltage?
76.8 V nominal, from 24 cells of 3.2 V in series.
How many temperature channels does the BMS read?
Four.
What converts pack voltage to 12 V?
A DC/DC converter giving 13.8 V DC.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a quote: Contact Us or Tenders.
