High Voltage Power Electronics Lab Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13012
Indian Lab Suppliers supplies the High Voltage Power Electronics Lab (Product ID: 13012) as part of its electronics engineering lab equipment range. It is a vertical workbench for diode, SCR and IGBT converter experiments on single-phase and three-phase mains, with lamp, motor and inductive loads.
Quick Answer
The bench carries mains and step-down single- and three-phase supplies behind 10 A MCBs, plug-in firing-circuit and power-circuit modules with RC snubbers, and power diodes rated 1000 V/6 A, SCRs rated 600 V/16 A and IGBTs rated 600 V/10 A. Experiments cover uncontrolled and controlled half-wave, full-wave and bridge rectifiers, semiconverters in common-cathode, common-anode and asymmetrical forms, single- and three-phase AC voltage controllers and a single-phase cycloconverter, with lamp or motor load and with a freewheeling diode. A two-channel 50 MHz digital storage oscilloscope, an isolated power scope and digital AC/DC meters are built in. The three-phase supply is listed as 230 V per phase and 440 V line, and motors for the three-phase motor-load experiments are optional, so please confirm both at quotation. Circuits carry lethal mains voltages: connect only with the supply off and work under qualified supervision.
Key Specifications
| Parameter | Detail |
|---|---|
| Mains supplies | 1-phase 230 V ±10%, 50 Hz (also 115-0-115 V, 2 A); 3-phase 230 V per phase, 50 Hz; 10 A MCBs |
| Low-voltage supplies | 18-0-18 V AC; 15 V per phase 3-phase AC; DC ±30 V and ±15 V (250 mA), ±12 V and ±5 V (500 mA) |
| Power devices | Diode 1000 V/6 A; SCR 600 V/16 A; IGBT 600 V/10 A; internal RC snubbers |
| Firing circuits | 1-phase ramp comparator 30–180°; 3-phase 30–150°; cycloconverter 30–180°; inverter firing 50 Hz square wave, 10 Vpp |
| Oscilloscope | Built-in 2-channel DSO, 50 MHz, 500 MSa/s real time, 32 kpts, 2 mV–10 V/div, 1 MΩ input; power scope with 1500 V isolated measurement |
| Meters | Digital AC voltmeter 0–500 V, AC ammeter 0–25 A, DC voltmeter 0–650 V, DC ammeter 0–25 A |
| Loads | 4 x 200 W lamps; inductive load 300/350/400 mH, 1.5 A; universal motor 1/8 HP |
| Connections | 2 mm and 4 mm safety sockets; test points on firing circuits |
| Build | Vertical workbench with or without table; rear exhaust fan; short-circuit protection |
Where This Is Used
Used in power electronics labs of engineering colleges and polytechnics for rectifier, converter and thyristor-control practicals. A module-based alternative is the Power Electronics Training System (Product ID: 13013). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which power devices are fitted?
Power diodes, SCRs and IGBTs, each on its own assembly with RC snubbers.
Is an oscilloscope included?
Yes, a built-in 2-channel 50 MHz digital storage oscilloscope with an isolated power scope.
Can it be ordered without a table?
Yes, it is offered with or without a table.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the High Voltage Power Electronics Lab, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpg)
 (1).jpeg)
.jpeg)