New Energy Vehicle Power Battery BMS Management and AC/DC Charging Teaching Platform Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13543
Indian Lab Suppliers supplies the New Energy Vehicle Power Battery BMS Management and AC/DC Charging Teaching Platform (Product ID: 13543) as part of its electronics engineering lab equipment range. It combines a 76.8 V lithium iron phosphate battery system with AC and DC charging modules for teaching battery management and charging-pile diagnosis.
Quick Answer
The battery system has a BMS with main and cluster boards, on-board charger, DC/DC converter, main positive, main negative, DC and pre-charge relays with pre-charge resistors, 2 manual service disconnects, Hall current sensor, ignition switch, 12 V starter battery and detection panel. Contactors are rated 120 A for pack output and 30 A for charging and pre-charge. A 43-inch touch all-in-one computer, intelligent fault-setting system and smart detection terminal support fault exercises such as charger input and output over- or under-voltage, meter and contactor communication faults, emergency-stop faults and charging overheating. The two sizes listed (1600 mm and 7600 mm long) should be confirmed at quotation, as should the charging connector standard.
Key Specifications
| Parameter | Detail |
|---|---|
| Battery pack | Lithium iron phosphate, DC 76.8 V |
| Contactor ratings | Pack output 120 A; charging and pre-charge 30 A |
| Service disconnects | 2 |
| Charging | Mode 2 charging gun, AC and DC charging inlets, AC and DC charging modules |
| Computer | 43-inch touch all-in-one with host software |
| Fault setting | Intelligent fault-setting system |
| Working voltage | DC 12 V |
| Working temperature | −20 to +40 °C |
| Size | 1600 × 850 × 1700 mm (please confirm) |
Where This Is Used
Students sort cells, assemble modules, install contactors, sensors, BMS and DC/DC units, and learn how AC and DC piles are built and controlled; it extends the New Energy Vehicle Battery Pack Test Training Platform (Product ID: 13542) and the AC and DC Charging System Training Platform (Product ID: 13530). The 76.8 V pack needs insulated tools, gloves and an open service disconnect during wiring. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What is the battery voltage?
DC 76.8 V, lithium iron phosphate.
Can it be charged by AC and DC?
Yes, it has both AC and DC charging modules and inlets.
How are faults introduced?
Through the intelligent fault-setting system.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the New Energy Vehicle Power Battery BMS Management and AC/DC Charging Teaching Platform, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
 (1).png)
.png)