Electrical Wiring Learning System Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12946
Indian Lab Suppliers supplies the Electrical Wiring Learning System (Product ID: 12946) as part of its electronics engineering lab equipment range. It is a mobile, double-sided workstation on which students wire an industrial motor-control and electro-pneumatic system from loose components.
Quick Answer
The welded steel workstation (at least 48 × 60 × 30 inch, on four casters) carries a control panel, an electro-pneumatic panel, an operator station and two 1/3 HP three-phase induction motors. Control-panel parts are left unwired on purpose: a fused three-phase safety switch with lockout/tagout, padlocks and tags, fuse blocks, ground detection indicators, a control transformer, a reversing starter and a plain starter, a timer relay, a control relay, raceways and 50 DIN-rail terminal blocks. The pneumatic side (1.5 in bore × 4 in stroke cylinder, 5/2 single-solenoid spring-return valve, limit switch, pressure switch, flow control valve, filter/regulator) is pre-plumbed but not wired. The motors are rated 208–230/460 V three phase, so please confirm the motor voltage, frequency and compressed-air arrangement for your site at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Workstation | Welded steel, min. 48 × 60 × 30 inch, 4 casters, double-sided |
| Control panel | Fused 3-phase safety switch with lockout/tagout, 4-pole 5-wire power cord, hinged control cabinet 42 × 32 × 8 inch |
| Control parts | Two 3-phase and two 2-phase fuse blocks, control transformer, reversing starter, motor starter, timer relay, control relay, 50 DIN-rail terminals |
| Electro-pneumatic panel | Cylinder 1.5 in bore × 4 in stroke, 5/2 solenoid valve, DPST limit switch, SPDT pressure switch, flow control valve, filter/regulator |
| Operator station | 3 black push buttons, red mushroom button, 3-position selector, red/green/amber push-to-test lamps |
| Motors | 2 × 1/3 HP three-phase induction, 56 frame, 208–230/460 V, single shaft end |
| Curriculum | 2 learning activity packets, 14 skills, plus teacher’s guide with quizzes and record sheets |
Where This Is Used
Used in industrial electrician and maintenance training for print reading, wire sizing, splicing, bundling, labelling and panel layout. Students work on three-phase circuits, so lockout/tagout must be followed and power applied only after an instructor checks the wiring. See also the Industrial Installation Trainer (Product ID: 12987) and the Home Automation Electrical Wiring Trainer (Product ID: 12944). Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Are the components pre-wired?
No. Electrical parts are left unwired so students do the wiring; only the pneumatic parts are pre-plumbed.
What skills does the curriculum cover?
Print reading, wire sizing, installing industrial wiring, splicing, bundling, labelling and layout.
Is it mobile?
Yes, the steel workstation has four casters and can be used from both sides.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electricity and Magnetism
Request a Quote
For pricing, bulk quantities or tender documentation on the Electrical Wiring Learning System, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.jpg)
.jpg)
.png)
.png)
.jpeg)