Cruise Control System Instruction Board Manufacturer,Supplier and Exporter in India

Cruise Control System Instruction Board

Product Code : SCL-EELE-13586

Indian Lab Suppliers supplies the Cruise Control System Instruction Board (Product ID: 13586) as part of its electronics engineering lab equipment range. It is a mobile board with a working electronic cruise control and drive-by-wire throttle system.

Quick Answer

Students move the accelerator pedal position sensor and watch the electronic throttle valve open to match, which shows how a drive-by-wire throttle works. They then use the cruise switch and a simulated speed signal to set and cancel cruise, and see the engine control unit adjust throttle opening to hold the set speed in closed-loop control. The board runs from 220 V AC ±10%, 50 Hz with 12 V DC working voltage and measures 1240 × 600 × 1700 mm, in a 1.5 mm pressed cold-rolled sheet cabinet on a 60 × 40 × 3 mm steel frame with 100 × 60 mm castors.

Key Specifications

ParameterDetail
SystemWorking electronic cruise control with electronic throttle
InputsAccelerator pedal position sensor, cruise switch, speed signal
OutputElectronic throttle valve controlled by the ECU
Supply220 V AC ±10%, 50 Hz
Working voltage12 V DC
Frame and castors60 × 40 × 3 mm steel tube, 100 × 60 mm castors
Size (L × W × H)1240 × 600 × 1700 mm
Working temperature−40 to +50 °C

Where This Is Used

It is used in engine-management lessons on electronic throttle and speed control, with the Automobile CAN-BUS System Instruction Board (Product ID: 13580) for network signals. Keep fingers away from the throttle valve while powered. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.

Frequently Asked Questions

Can students see the throttle move?
Yes, the throttle valve opens as the pedal sensor is moved.

How is road speed provided?
By a simulated speed signal.

What supply does it need?
220 V AC ±10%, 50 Hz.

Related Categories

Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Cruise Control System Instruction Board, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us