Gasoline Engine Electronic Control System Instruction Board Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13733
Indian Lab Suppliers supplies the Gasoline Engine Electronic Control System Instruction Board (Product ID: 13733) as part of its electronics engineering lab equipment range. A mobile teaching board built from real petrol engine electronic control parts, driven so the system works as it would on an engine.
Quick Answer
The board carries a real ECU with its sensors and actuators. A simulated crankshaft drive supplies the signals the ECU needs, so it fires the spark plugs, runs the fuel pump and pulses the injectors, and students can follow each step from sensor input to actuator output. A fuel pressure gauge shows system pressure. The bench runs from 220 V mains and the control system from 12 V DC. Please confirm the fuel pressure gauge range and units at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Components | Real ECU, sensors and actuators |
| Demonstrated | Spark ignition, fuel pump operation, injector pulses |
| Bench supply | 220 V AC ±10%, 50 Hz |
| Control system supply | 12 V DC |
| Gauge | Fuel pressure, 0-10 (units to be confirmed) |
| Frame | Steel tube, 60 × 40 × 3 mm |
| Cabinet | 1.5 mm stamped cold-rolled sheet |
| Casters | Mobile, 100 × 60 mm |
| Dimensions | Approx. 1000 × 600 × 1700 mm |
| Stated operating temperature | -40 to +50 °C |
Where This Is Used
Used for engine management lessons before students work on running engines such as the Gasoline Engine Training Platform (Product ID: 13727). The diesel counterpart is the Diesel Common Rail Engine Electronic Control System Instruction Board (Product ID: 13734). The ignition circuit produces high voltage at the plugs, so switch off before touching ignition parts, and earth the mains supply. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying this petrol engine management training board alongside its wider electronics lab equipment range, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
Is a complete engine included?
No. The board uses real control-system parts with a simulated crankshaft drive.
Which outputs can students see working?
Spark plug ignition, fuel pump operation and injector pulses.
What supplies does it need?
220 V AC ±10%, 50 Hz for the bench, and 12 V DC for the control system.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Gasoline Engine Electronic Control System Instruction Board, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
-Photoroom (1).png)
.jpg)
.jpeg)
.png)