Automobile CAN-BUS System Instruction Board Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13580
Indian Lab Suppliers supplies the Automobile CAN-BUS System Instruction Board (Product ID: 13580) as part of its electronics engineering lab equipment range. It is a working in-vehicle CAN network laid out on a mobile board, with the control units and high- and low-speed bus lines in view.
Quick Answer
Students operate switches that put real signals on the network: gear switch and throttle, road speed and coolant temperature, anti-theft, and electric window and door lock commands. They then see which control unit sends each message and which units receive and act on it, across both the high-speed and low-speed CAN lines. The board runs from 220 V AC ±10%, 50 Hz with 12 V DC working voltage and measures about 2400 × 700 × 1800 mm, in a 1.5 mm pressed cold-rolled sheet cabinet on a 60 × 40 × 3 mm steel frame with 100 × 60 mm castors.
Key Specifications
| Parameter | Detail |
|---|---|
| Network | Working CAN bus with ECUs, high- and low-speed lines |
| Simulated signals | Gear switch, throttle, speed, coolant temperature, anti-theft, windows, door locks |
| Supply | 220 V AC ±10%, 50 Hz |
| Working voltage | 12 V DC |
| Cabinet | 1.5 mm pressed cold-rolled sheet |
| Frame and castors | 60 × 40 × 3 mm steel tube, 100 × 60 mm castors |
| Size (L × W × H) | Approx. 2400 × 700 × 1800 mm |
| Working temperature | −40 to +50 °C |
Where This Is Used
It is used in vehicle networking and body electronics lessons, together with the Whole Vehicle Electric Training Platform (Product ID: 13579) and the Electric Door, Window and Door Lock System Instruction Board (Product ID: 13584). Connect to an earthed 220 V supply. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which CAN lines are shown?
Both high-speed and low-speed CAN lines.
What signals can students send?
Gear, throttle, speed, coolant temperature, anti-theft, window and door lock signals.
What supply does it need?
220 V AC ±10%, 50 Hz.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Automobile CAN-BUS System Instruction Board, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpg)
.png)
.jpeg)
.jpg)