Air Conditioning and Climate Control Trainer Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13756
Indian Lab Suppliers supplies the Air Conditioning and Climate Control Trainer (Product ID: 13756) as part of its electronics engineering lab equipment range. A mobile board simulator of a working automatic climate control and air conditioning system using R134a refrigerant and an orifice tube.
Quick Answer
Students watch the compressor's electromagnetic clutch engage, follow the mixing unit through its modes and see the defrost, recirculation and footwell flaps move, with an LED diagram showing which outlets are active. Gauges show high-side and low-side refrigerant pressure, which changes with radiator fan speed. A voltmeter reads the flap motor potentiometers and a thermometer shows temperature changes with refrigerant pressure. More than 15 faults can be set with jumpers, and the control unit can be diagnosed with a scan tool or through its own self-diagnosis.
Key Specifications
| Parameter | Detail |
|---|---|
| System | Automatic climate control, orifice tube, R134a |
| Visible parts | Compressor with electromagnetic clutch, mixing unit, air flaps |
| Gauges | High-side and low-side refrigerant pressure |
| Displays | Voltmeter, thermometer, LED outlet diagram |
| Fault simulation | More than 15 faults |
| Diagnosis | 16-pin OBD: fault codes, live data, clutch and fan activation, coding; manual self-diagnosis |
| Power supply | 220 V |
| Dimensions (H × L × W) | Approx. 1680 × 800 × 500 mm |
| Weight | Approx. 100 kg |
Where This Is Used
The dual-zone version with heater is the Dual Zone Air Conditioning and Climate Control Trainer with Auxiliary Heater (Product ID: 13757); blower circuits are covered on the Air Conditioner Blower Trainer (Product ID: 13785). Refrigerant is under pressure and can cause frostbite: wear eye protection and gloves, leave charging and recovery to trained staff with proper equipment, and never vent refrigerant. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which expansion device does the system use?
An orifice tube.
Can faults be read without a scan tool?
Yes, the control unit supports manual self-diagnosis as well as OBD diagnosis.
How many faults can be set?
More than 15, by removing banana plug jumpers.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Air Conditioning and Climate Control Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.jpg)
.png)
.jpg)
.png)
