Adp, PP, comp, HDPE 110mmxmthd GI. 4"O/ND-P Manufacturer,Supplier and Exporter in India
Product Code : ILS-WD-11235
Indian Lab Suppliers supplies the Adaptor, PP, Compression, HDPE 110mm x Male Thread 4" GI (Product ID: 11235), part of the Water Distribution & Fittings range under Water and Sanitation equipment, used for connecting an HDPE water main to a threaded GI pipe socket.
Quick Answer
The Adaptor, PP, Compression, HDPE 110mm x Male Thread 4" GI is a straight polypropylene adaptor with a compression fitting on the 110mm-outside-diameter HDPE end and an external male thread for a 4" nominal-diameter GI pipe socket, drinking-water approved and rated for 10 bar at 20°C.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 11235 |
| Material | Reinforced, high-impact-strength polypropylene (UV stabilised) |
| Suitable temperature range | 0°C to 50°C |
| Drinking water use | Approved for use with drinking water |
| Diameters | 110 mm (HDPE outside diameter) x 4" (GI nominal diameter) |
| Pressure rating | 10 bar at 20°C |
| Connection type | Straight adaptor: compression (HDPE end), external male thread (GI end) |
This straight adaptor connects a 110mm HDPE pipe to a 4" GI pipe socket, using a compression connection on the HDPE side and an external male thread on the GI side.
Where This Adaptor Is Used
The Adaptor, PP, Compression, HDPE 110mm x Male Thread 4" GI is used to transition an HDPE water main to a threaded GI pipe socket, forming part of a broader range of water distribution fittings such as the Tee, PP, Compression, HDPE 110 x 110 x 110mm.
Frequently Asked Questions
What material is this adaptor made of?
Reinforced, high-impact-strength polypropylene that is UV stabilised.
Is it approved for drinking water?
Yes, the manufacturer states it is approved for use with drinking water.
What temperature range and pressure rating does it carry?
0°C to 50°C, rated for 10 bar at 20°C.
How does it connect on each end?
A compression fitting on the 110mm HDPE end and an external male thread on the 4" GI end, sized to fit a GI pipe socket.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Treatment
Request a Quote
For pricing, bulk quantities or tender documentation on the Adaptor, PP, Compression, HDPE 110mm x Male Thread 4" GI, reach our team via Contact Us or submit your requirement through our Tenders page.
