Elbow 90º, eq, fthd, GI. 4" ND, 14 Bar Manufacturer,Supplier and Exporter in India
Product Code : ILS-WD-11226
Indian Lab Suppliers supplies the Elbow, 90°, Equal, Female Thread, GI, 4" ND, 14 Bar (Product ID: 11226), part of the Water Distribution & Fittings range under Water and Sanitation equipment, used for turning a galvanized iron (GI) water pipe run through a right angle.
Quick Answer
The Elbow, 90°, Equal, Female Thread, GI, 4" ND, 14 Bar is a 90-degree socket-type GI elbow with an internal female parallel thread and a 4" nominal diameter, rated for 14 bar (200 lb/sq inch) pressure, made of malleable cast iron that is hot-dip galvanized and threaded after galvanizing.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 11226 |
| Material | Malleable cast iron, hot-dip galvanized and threaded after galvanizing |
| Nominal diameter | 4" |
| Pressure rating | 14 bar (200 lb/sq inch) |
| Thread type | Internal female parallel thread |
| Type | 90° equal elbow, socket |
This is a socket-type 90° elbow fitting, a separate product from the equal Bend, 90° fitting (Product ID 11225). Both change the direction of a GI pipe run by a right angle.
Where This Elbow Is Used
The Elbow, 90°, Equal, Female Thread, GI, 4" ND, 14 Bar is used wherever a GI water pipe run needs to change direction by a right angle, forming part of a broader GI pipe and fittings range for water distribution systems such as the Bend, 90°, Equal, Female x Female, GI, 4" ND, 14 Bar.
Frequently Asked Questions
What material is this elbow made of?
Malleable cast iron, hot-dip galvanized and threaded after galvanizing.
What is the nominal diameter and pressure rating?
4" nominal diameter, rated for 14 bar (200 lb/sq inch).
Is this the same as the Bend, 90° fitting?
No. The Elbow and the Bend, 90° (Product ID 11225) are separate products. Both are 90-degree, equal, female-threaded GI fittings used to change pipe direction; contact us for a comparison of dimensions and design if the distinction matters for your installation.
What is this fitting used for?
Turning a galvanized iron water pipe run through a 90-degree angle.
Related Categories
Sanitation & Hygiene · Water and Sanitation · Water Testing · Pump Riser Pipe · Water Treatment
Request a Quote
For pricing, bulk quantities or tender documentation on the Elbow, 90°, Equal, Female Thread, GI, 4" ND, 14 Bar, reach our team via Contact Us or submit your requirement through our Tenders page.
