Vacuum Tube Characteristics (For Diode, Triode, Tetrode & Pentode) with power supply and 5 meters (C.R.) (V.V.) Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12175
Indian Lab Suppliers supplies the Vacuum Tube Characteristics (For Diode, Triode, Tetrode & Pentode) with power supply and 5 meters (C.R.) (V.V.) (Product ID: 12175) as part of its electronics engineering lab equipment range. It is a single self-contained set-up for plotting the characteristics of diode, triode, tetrode and pentode vacuum tubes.
Quick Answer
A 9-pin and an 8-pin valve base are fixed on the panel with every electrode brought out to sockets, so each tube type can be wired for test. Supplies are 0–300 V DC, 100 mA for the plate, 30–300 V DC, 30 mA for the screen grid, 0 to ±10 V DC, 20 mA for bias and 2 / 3 / 4 / 5 / 6.3 V AC for the filament. Five 65 mm meters are fitted: two DC voltmeters (30/100/300 V and 100/300 V), two DC milliammeters (10/30/100 mA and 5/30 mA) and a ±10 V bias voltmeter. Which valves are supplied with the bases is not stated; please confirm at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Valve bases | 9-pin and 8-pin, electrodes brought out for connection |
| Plate supply | 0–300 V DC, 100 mA, variable, regulated |
| Screen supply | 30–300 V DC, 30 mA, variable, regulated |
| Bias supply | 0 to ±10 V DC, 20 mA, variable |
| Filament supply | 2 / 3 / 4 / 5 / 6.3 V AC |
| Voltmeters | DC 30/100/300 V; DC 100/300 V; DC ±10 V |
| Milliammeters | DC 10/30/100 mA; DC 5/30 mA |
| Mains input | 230 V ±10%, 50 Hz AC, with mains switch, fuse and pilot lamp |
Where This Is Used
Replaces separate boards such as the Diode Characteristics with power supply and 2 meters (Product ID: 12161), Triode Characteristics with power supply and 2 meters (C.R.) (V.V.) (Product ID: 12162), Tetrode Characteristics with power supply and 4 meters (C.R.) (V.V.) (Product ID: 12174) and Pentode Characteristics with power supply and 2 meters (C.R.) (V.V.) (Product ID: 12163) where bench space is short. Supplies reach 300 V DC; use under supervision and switch off before rewiring. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which tube types can be tested?
Diode, triode, tetrode and pentode.
How many meters are fitted?
Five.
Are valves included?
Please confirm the valves supplied at quotation.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Physics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Vacuum Tube Characteristics (For Diode, Triode, Tetrode & Pentode) with power supply and 5 meters (C.R.) (V.V.), reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
 Cutaway Model (1).jpg)
 with power supply-Photoroom (1).png)
.png)
.png)