Losses Due to Friction in Pipe Lines Manufacturer,Supplier and Exporter in India

Losses Due to Friction in Pipe Lines

Product Code : SCL-CELE-13996

Indian Lab Suppliers supplies the Losses Due to Friction in Pipe Lines (Product ID: 13996) as part of its Civil Engineering Lab Equipment range. It measures friction head loss in two galvanised iron pipes in parallel.

Quick Answer

Two GI pipes, 1/2 in x 1 m and 3/4 in x 1.25 m, are connected in parallel with a control valve on each, so each can be tested alone or both together. Pressure tappings and a differential manometer give the head loss, and a 25 L measuring tank with piezometer and stopwatch gives the flow. An FHP pump recirculates water from a 50 L sump.

Key Specifications

ParameterDetail
Pipe 1GI, 1/2 in, 1 m
Pipe 2GI, 3/4 in, 1.25 m
ArrangementParallel, with individual control valves
PressureDifferential manometer
Sump tank50 L
Flow measurement25 L measuring tank; stopwatch

Where This Is Used

Students find the Darcy friction factor and show that parallel branches share the same head loss. Related: Losses Due to Friction in Pipe Lines (Hb Accessory) (Product ID: 14026) and Losses Due to Pipe Fittings, Sudden Enlargement & Contraction (Product ID: 13997). Browse the full Civil Engineering Lab Equipment range or related Engineering Lab Equipment apparatus.

Frequently Asked Questions

What pipes are fitted?
GI pipes of 1/2 in (1 m) and 3/4 in (1.25 m).

Can each pipe be tested alone?
Yes, using its control valve.

What equation is used?
The Darcy-Weisbach equation.

Related Categories

Civil Engineering Lab Equipment · Engineering Lab Equipment · Water and Sanitation

Request a quote: Contact Us or Tenders.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us