Engine Control System Bosch Motronic MED7.5.10 Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13744
Indian Lab Suppliers supplies the Engine Control System Bosch Motronic MED7.5.10 (Product ID: 13744) as part of its electronics engineering lab equipment range. A mobile board simulator of a direct petrol injection engine control system, covering operation and diagnosis.
Quick Answer
The low-pressure fuel pump runs in a transparent tank, and students monitor low-side fuel pressure, injected quantity and spray pattern. An airflow simulator drives the air-mass meter and intake air temperature sensor; crankshaft speed is set by hand, and built-in simulators vary the lambda probe, engine temperature, NOx sensor and exhaust gas temperature signals. A TFT voltmeter shows component voltages, and more than 20 faults are set by removing jumpers on the printed wiring diagram. Intake manifold flap control needs an optional vacuum pump.
Key Specifications
| Parameter | Detail |
|---|---|
| System | Direct petrol injection with ignition control |
| Sensors on board | Accelerator pedal senders, throttle potentiometers, fuel pressure, manifold pressure, coolant and exhaust gas temperature, air-mass meter, EGR and manifold flap potentiometers |
| Simulators | Airflow, crank speed, lambda, engine temperature, NOx, exhaust gas temperature |
| Measurement | Banana sockets incl. ignition high-voltage circuit; TFT voltmeter |
| Fault simulation | More than 20 faults |
| Diagnosis | 16-pin OBD socket: ECU identification, reading and erasing fault codes, live data, actuator tests, throttle adaptation, coding |
| Frame | Mobile aluminium, closed structure |
| Power supply | 220 V |
| Dimensions (H × L × W) | Approx. 1820 × 1360 × 500 mm |
| Weight | Approx. 105 kg |
Where This Is Used
The next step after the Engine Control System Motronic M 3.8.X (MPI) (Product ID: 13743); for diesel systems see the Diesel Engine Control System CR/EDC 15 (Product ID: 13745). The ignition circuit carries high voltage: use rated probes and switch off before changing jumpers. Keep the fuel side ventilated and away from flames. The vacuum pump for manifold flap control is optional. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which exhaust-side signals can be simulated?
Lambda probe, NOx sensor and exhaust gas temperature.
Is the vacuum pump included?
No. Intake manifold flap regulation needs an optional vacuum pump.
How are voltages displayed?
On the integrated TFT voltmeter, or with a multimeter or oscilloscope at the banana sockets.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Engine Control System Bosch Motronic MED7.5.10, reach our team via Contact Us or submit your requirement through our Tenders page.
 (1).jpg)
.png)
 Trainer (1).jpg)
.png)
.png)