Engine Control System Motronic M 3.8.X (MPI) Manufacturer,Supplier and Exporter in India
 (1).jpeg)
Product Code : SCL-EELE-13743
Indian Lab Suppliers supplies the Engine Control System Motronic M 3.8.X (MPI) (Product ID: 13743) as part of its electronics engineering lab equipment range. A mobile board simulator built on a complete multipoint petrol injection (MPI) and ignition control system, for learning how it works and how to diagnose it.
Quick Answer
The fuel pump sits in a transparent tank so students can watch it run and check fuel pressure, injected quantity and spray pattern. An adjustable airflow simulator drives the air-mass meter and air temperature sensor, crankshaft speed is set by hand, and an oxygen sensor signal simulator changes the air/fuel mixture. The spark plugs can be seen firing. Every sensor and actuator is wired to banana sockets on a printed wiring diagram, and removing jumpers creates more than 20 faults for troubleshooting.
Key Specifications
| Parameter | Detail |
|---|---|
| System | Multipoint petrol injection with ignition control |
| Simulators | Airflow rate, crankshaft speed, oxygen sensor signal |
| Measurement | Banana sockets at every sensor and actuator, incl. ignition high-voltage circuit |
| Fault simulation | More than 20 faults; optional console with 10 hidden faults |
| Diagnosis | 16-pin OBD socket: ECU identification, reading and erasing fault codes, live data, actuator tests, throttle valve adaptation, coding |
| Frame | Mobile aluminium, closed structure |
| Power supply | 12 V DC (battery or power supply unit not included) |
| Dimensions (H × L × W) | Approx. 1820 × 1360 × 500 mm |
| Weight | Approx. 70 kg |
Where This Is Used
Used in automotive electronics labs, with the Engine Control System Bosch Motronic MED7.5.10 (Product ID: 13744) for direct injection and the Gasoline Engine Electronic Control System Instruction Board (Product ID: 13733). The ignition circuit carries high voltage, so use rated probes and switch off before moving jumpers; keep the fuel side ventilated and away from flames. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
How many faults can be set?
More than 20 by removing banana plug jumpers; an optional examination console adds 10 hidden faults.
Is a power supply included?
No. It needs a 12 V DC battery or power supply unit, not included as standard.
What can be done through the OBD socket?
ECU identification, reading and erasing fault codes, live data, actuator tests (as the ECU allows), throttle valve adaptation and coding.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Engine Control System Motronic M 3.8.X (MPI), reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.jpg)
.png)