Diesel Engine Control System CR/EDC 15 Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13745
Indian Lab Suppliers supplies the Diesel Engine Control System CR/EDC 15 (Product ID: 13745) as part of its electronics engineering lab equipment range. A two-part simulator of a common rail diesel injection system: a mechanical trolley with the pump and injectors, and an electronic board with the engine management.
Quick Answer
The trolley shows the high-pressure pump and injectors working, and the board carries the electronic control; the two are wired together and run as one system. Students monitor the high-pressure supply, injected quantity, back leak and spray pattern. An airflow simulator drives the air-mass meter and air charge temperature sensor, crank speed is set by hand, and coolant temperature and manifold pressure signals can be varied. A TFT voltmeter and banana sockets allow measurements, and more than 20 faults can be set.
Key Specifications
| Parameter | Detail |
|---|---|
| System | Common rail diesel electronic injection |
| Parts | Mechanical trolley (pump, injectors) + electronic board |
| Sensors on board | Two accelerator pedal senders, air-mass meter, air charge temperature, rail pressure, manifold pressure, coolant and fuel temperature, EGR potentiometer |
| Measurement | Banana sockets; TFT voltmeter |
| Fault simulation | More than 20 faults |
| Diagnosis | 16-pin OBD socket: ECU identification, reading and erasing fault codes, live data, actuator tests, coding |
| Power supply | 220 V / 12 V |
| Board dimensions (H × L × W) | Approx. 1820 × 1360 × 500 mm |
| Trolley dimensions (H × L × W) | Approx. 1500 × 800 × 500 mm |
| Weight | Approx. 135 kg |
Where This Is Used
Used for diesel diagnosis training alongside the Diesel Common Rail Engine Electronic Control System Instruction Board (Product ID: 13734) and the running Diesel Engine Training Platform (Product ID: 13730). Injection pressure is very high: keep hands away from injector sprays, never loosen a pressurised line, and wear eye protection. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Why is the trainer in two parts?
The trolley shows the mechanical high-pressure pump and injectors; the board shows the electronic management. They run as one system.
Can injector back leak be checked?
Yes, along with injected quantity and spray pattern.
What supply does it need?
220 V mains, with 12 V for the system.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Diesel Engine Control System CR/EDC 15, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpeg)
.png)
.png)
.jpeg)
.png)
.jpg)
.png)