DC Shunt Motor / Alternator Experiment Panel With Simulation of Faults on Alternator Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12838
Indian Lab Suppliers supplies the DC Shunt Motor / Alternator Experiment Panel With Simulation of Faults on Alternator (Product ID: 12838) as part of its electronics engineering lab equipment range. It is a control panel and machine set in which a 2 HP DC shunt motor drives a 1 kVA alternator, with switchable faults on the alternator side.
Quick Answer
The motor is started through a 3-point starter, and the panel meters DC volts, amps and watts on one multifunction meter and three-phase alternator values on another. A variable DC supply (0-270 V) excites the alternator field, which is read on its own DC meter. Students load the alternator through external-load terminals and then use the R, Y, B and N selector switches and an earth-fault toggle to create faults, which an ELCB, a motor protection relay and a fault buzzer detect. A shunt motor’s speed falls below base speed with added armature resistance and rises above it with a weakened field. The panel connects to 230 V single-phase mains and takes the motor’s DC from an external variable DC source, so please confirm that source at quotation; the set works at 230 V DC and 415 V AC and must be run under qualified supervision.
Key Specifications
| Parameter | Detail |
|---|---|
| DC motor | Shunt, 2 HP, 1500 rpm, 230 V DC armature, 8 A, 230 V DC field, class B, S1 duty, B3 mounting |
| Alternator | Synchronous, 1 kVA, 415 V AC, 1500 rpm, separate 230 V DC excitation, class F |
| Meters | DC multifunction (V, A, W); AC multifunction (three-phase); DC meter for field excitation |
| Protection | 2-pole mains MCB, ELCB, motor protection relay, fault buzzer |
| Fault simulation | R, Y, B, N selector switches and earth-fault toggle |
| Starting | 3-point starter, 3-way selector switch |
| Terminals | Banana terminals for motor, alternator, external load, DC output and starter |
| Supply | 230 V AC single-phase to panel; DC input from external variable source |
Where This Is Used
Used in electrical machines and protection labs to link machine operation with fault detection; see the Generation Trainer with Protection Relays (Product ID: 12857) and the DC Drive Training System (Product ID: 12831). Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
What are the machine ratings?
A 2 HP, 1500 rpm DC shunt motor and a 1 kVA, 415 V alternator.
Which faults can be simulated?
Phase faults via selector switches on R, Y, B and N, and an earth fault via a toggle switch.
How is an earth fault detected?
By the ELCB, with a fault buzzer as indication.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the DC Shunt Motor / Alternator Experiment Panel With Simulation of Faults on Alternator, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpeg)
.png)
.png)
.jpg)
.jpg)