DC Drive Training System Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12831
Indian Lab Suppliers supplies the DC Drive Training System (Product ID: 12831) as part of its electronics engineering lab equipment range. It is a thyristor-based DC drive with a 1 HP shunt motor and mechanical brake loading, for running, load and fault-finding experiments.
Quick Answer
The drive gives a fixed 220 V, 2 A DC supply (for the field) and a variable 0 to 220 V, 12 A DC supply, with over-current and emergency protection and digital 300 V and 20 A meters. The 1 HP, 220 V DC shunt motor runs at 1500 rpm and is loaded by a cast aluminium brake drum and pulley, with a digital tachometer for speed. Students run and reverse the motor, carry out no-load and load tests, compare self-excited and separately excited operation, and trace faults switched in by toggle switches. The drive works at 220 V DC with a rotating machine, so operate it only under qualified supervision, with guards in place and the frame earthed.
Key Specifications
| Parameter | Detail |
|---|---|
| Input | 230 V AC ±10%, 50 Hz |
| DC outputs | Fixed 220 V ±10%, 2 A; variable 0-220 V ±10%, 12 A |
| Motor | DC shunt, 1 HP, 220 V ±10%, 1500 rpm ±7.5%, class B insulation |
| Loading | Mechanical brake drum and pulley, cast aluminium |
| Meters | Digital voltmeter 300 V, digital ammeter 20 A, digital tachometer up to 19,999 rpm |
| Protection | Over-current protection, 16 A single-phase MCB, 10 A emergency switch |
| Controls | Start and stop push buttons; fault simulation toggle switches |
| Panel | FRP control board with connection diagram |
Where This Is Used
Used in electrical machines and drives labs; the Three Phase Controlled Rectifier (Product ID: 12822) covers the converter side, and the DC Shunt Motor / Alternator Experiment Panel With Simulation of Faults on Alternator (Product ID: 12838) extends DC machine work. Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
What motor is supplied?
A 1 HP, 220 V DC shunt motor rated 1500 rpm.
How is the motor loaded?
With a mechanical brake drum and pulley.
Can faults be simulated?
Yes, faults are introduced with toggle switches for troubleshooting practice.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the DC Drive Training System, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpg)
.png)
.png)