DC Drive Training System Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12831
Indian Lab Suppliers supplies the DC Drive Training System (Product ID: 12831) as part of its electronics engineering lab equipment range. It is a thyristor-based DC drive with a 1 HP shunt motor and mechanical brake loading, for running, load and fault-finding experiments.
Quick Answer
The drive gives a fixed 220 V, 2 A DC supply (for the field) and a variable 0 to 220 V, 12 A DC supply, with over-current and emergency protection and digital 300 V and 20 A meters. The 1 HP, 220 V DC shunt motor runs at 1500 rpm and is loaded by a cast aluminium brake drum and pulley, with a digital tachometer for speed. Students run and reverse the motor, carry out no-load and load tests, compare self-excited and separately excited operation, and trace faults switched in by toggle switches. The drive works at 220 V DC with a rotating machine, so operate it only under qualified supervision, with guards in place and the frame earthed.
Key Specifications
| Parameter | Detail |
|---|---|
| Input | 230 V AC ±10%, 50 Hz |
| DC outputs | Fixed 220 V ±10%, 2 A; variable 0-220 V ±10%, 12 A |
| Motor | DC shunt, 1 HP, 220 V ±10%, 1500 rpm ±7.5%, class B insulation |
| Loading | Mechanical brake drum and pulley, cast aluminium |
| Meters | Digital voltmeter 300 V, digital ammeter 20 A, digital tachometer up to 19,999 rpm |
| Protection | Over-current protection, 16 A single-phase MCB, 10 A emergency switch |
| Controls | Start and stop push buttons; fault simulation toggle switches |
| Panel | FRP control board with connection diagram |
Where This Is Used
Used in electrical machines and drives labs; the Three Phase Controlled Rectifier (Product ID: 12822) covers the converter side, and the DC Shunt Motor / Alternator Experiment Panel With Simulation of Faults on Alternator (Product ID: 12838) extends DC machine work. Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
What motor is supplied?
A 1 HP, 220 V DC shunt motor rated 1500 rpm.
How is the motor loaded?
With a mechanical brake drum and pulley.
Can faults be simulated?
Yes, faults are introduced with toggle switches for troubleshooting practice.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a quote: Contact Us or Tenders.
.jpg)
.png)
.png)
.png)
.png)
.png)