Phase Difference in L.C.R. Circuits with power supply and 1 multi range meter Manufacturer,Supplier and Exporter in India

Product Code : SCL-EELE-12216

Indian Lab Suppliers supplies the Phase Difference in L.C.R. Circuits with power supply and 1 multi range meter (Product ID: 12216) as part of its electronics engineering lab equipment range. It is a self-contained board for studying phase difference in L-C, L-R, C-R and L-C-R circuits by the vector diagram and superposition methods.

Quick Answer

A selection of inductors, capacitors and resistors lets students combine L-C, L-R, C-R and L-C-R circuits, measure the component voltages and construct the phasor diagram to find the phase angle. A mains step-down transformer gives 10, 20, 30, 50, 80 and 100 V AC tappings plus a separate 12 V, 500 mA winding as the standard voltage. Voltages are read on an AC voltmeter with 10, 100 and 200 V ranges; a wire-wound potentiometer and four inductors are fitted. The higher tappings (up to 100 V AC) can give a shock, so connect with the supply off.

Key Specifications

ParameterDetail
AC sourceTransformer taps 10, 20, 30, 50, 80, 100 V; separate 12 V at 500 mA winding
AC voltmeter65 mm rectangular dial, 10 V / 100 V / 200 V
ComponentsFour inductors, wire-wound potentiometer, capacitors and resistors
CircuitsL-C, L-R, C-R, L-C-R
MethodsVector diagram; superposition
Mains230 V ±10%, 50 Hz AC; ON/OFF switch, fuse, jewel light
Size and weightW 300 × H 140 × D 200 mm, about 9 kg
Other apparatusNone required

Where This Is Used

Used in 10+2 and B.Sc. AC circuit practicals. Related: Power & Power Factor in Series LCR Circuits using single phase with power supply and 4 meters (Product ID: 12239) and Reactive Elements & Time Dependent Network Analysis with power supply and 1 multi range meter (Product ID: 12208). Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.

Frequently Asked Questions

Which circuit combinations are covered?
L-C, L-R, C-R and L-C-R.

Which methods are used?
The vector (phasor) diagram and superposition methods.

What is the 12 V winding for?
It is a separate standard-voltage supply rated 500 mA.

Related Categories

Electronics Engineering Lab Equipment · Electricity and Magnetism · Physics Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Phase Difference in L.C.R. Circuits with power supply and 1 multi range meter, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us