Electro Hydraulic Trainer Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13288
Indian Lab Suppliers supplies the Electro Hydraulic Trainer (Product ID: 13288) as part of its electronics engineering lab equipment range. It is the electro-hydraulic version of the aluminium-profile hydraulic trainer, with an electrical panel row for solenoid-valve control.
Quick Answer
Circuits are built on a 107 x 70 cm grooved T-bolt board (25 mm groove pitch) with quick-release plugs, and the upper panel row carries the electrical controls. The 50 bar power pack has a 25 litre tank, a 3 LPM gear pump, a 0.5 HP, 1440 rpm, 230 V AC motor, relief valve, 70 bar gauge and filters. Optional experiments include closed-loop servo position control using a 5 kΩ linear potentiometer (100 mm stroke) on a double-acting cylinder with a stroke-length display, open-loop control through a proportional flow and direction valve with built-in amplifier (±5 V input), and closed-loop control with LVDT feedback; a PLC is also optional. This listing has the same specification as the Hydraulic Trainer (Product ID: 13287). Please confirm the component list and options at quotation. Relieve system pressure before disconnecting any hose, keep hands clear of moving cylinders and wear eye protection. Use an earthed mains supply.
Key Specifications
| Parameter | Detail |
|---|---|
| Models | Hydraulic or electro-hydraulic; PLC optional |
| Power pack | 50 bar; 25 L tank; gear pump 3 LPM; 0.5 HP, 1440 rpm, 230 V AC motor |
| Power pack fittings | Relief valve, 70 bar gauge, suction strainer, return-line filter, breather, oil level indicator |
| Board | Grooved aluminium T-bolt board 107 x 70 cm, 25 mm groove pitch, optionally double-sided |
| Rack | Anodised aluminium profile, 1165 mm W x 800 mm H; board reclines 0°/20°/30° |
| Weight (electro-hydraulic) | Net 70–75 kg; gross 85–90 kg |
| Optional experiments | Servo position control, proportional flow and direction control, LVDT closed loop (electro-hydraulic only) |
Where This Is Used
Used in mechanical, mechatronics and automation labs for electrically controlled hydraulic circuits and position control. Related: Electro Hydraulic Trainer Kit (PLC Based) (Product ID: 13286) and Advanced Customized Electro Hydraulic Trainer (Product ID: 13292). Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
What does the electrical panel row add?
Electrical control of the circuits, needed for solenoid-valve and position-control experiments.
Which position sensors are used?
A 5 kΩ linear potentiometer, and an LVDT for proportional closed-loop control.
How heavy is it?
About 70–75 kg net and 85–90 kg packed.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Electro Hydraulic Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
-Photoroom (1).png)
.png)
.png)
.png)
.jpg)