Hydraulic Trainer Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13287
Indian Lab Suppliers supplies the Hydraulic Trainer (Product ID: 13287) as part of its electronics engineering lab equipment range. It is a bench hydraulic trainer built on an aluminium profile rack, offered as a plain hydraulic or an electro-hydraulic model.
Quick Answer
The 50 bar power pack has a 25 litre tank, a 3 LPM gear pump driven by a 0.5 HP, 1440 rpm, 230 V AC motor, a relief valve, a 70 bar gauge, suction strainer, return-line filter, breather and oil level indicator. Components fit on a 107 x 70 cm grooved T-bolt board (25 mm groove pitch) using quick-release plugs and lever-operated adapters; the board reclines to 0°, 20° or 30° and can be double-sided. Options include a PLC, a table with three drawers and four casters, a ball valve for measuring flow into a beaker, and, on the electro-hydraulic model, closed-loop servo position control with a 5 kΩ linear potentiometer (100 mm stroke) and proportional valves with a ±5 V input and LVDT feedback. Please confirm the component list and options at quotation. Relieve system pressure before disconnecting any hose, keep hands clear of moving cylinders and wear eye protection.
Key Specifications
| Parameter | Detail |
|---|---|
| Models | Hydraulic or electro-hydraulic; PLC optional |
| Power pack | 50 bar; 25 L tank; gear pump 3 LPM; 0.5 HP, 1440 rpm, 230 V AC motor |
| Power pack fittings | Relief valve, 70 bar gauge, suction strainer, return-line filter, breather, oil level indicator |
| Board | Grooved aluminium T-bolt board 107 x 70 cm, 25 mm groove pitch, optionally double-sided |
| Rack | Anodised aluminium profile, 1165 mm W x 800 mm H; board reclines 0°/20°/30° |
| Weight (electro-hydraulic) | Net 70–75 kg; gross 85–90 kg |
| Optional experiments | Servo position control, proportional flow and direction control, LVDT closed loop (electro-hydraulic only) |
Where This Is Used
Used in mechanical and automation labs for hydraulic circuit building and, on the electro-hydraulic model, position control. This listing has the same specification as the Electro Hydraulic Trainer (Product ID: 13288); see also the Hydraulic Trainer (Advanced) (Product ID: 13290). Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
What pressure does the power pack give?
It is rated 50 bar, with a 70 bar gauge.
Can the board be tilted?
Yes, to 0°, 20° or 30°.
Is a PLC included?
A PLC is optional.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Hydraulic Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
-Photoroom.png)
.jpg)
.png)
 (1).jpg)
.jpg)
.png)
.jpg)
.png)