Electric Steering and Suspension Trainer Manufacturer,Supplier and Exporter in India

Electric Steering and Suspension Trainer

Product Code : SCL-EELE-13715

Indian Lab Suppliers supplies the Electric Steering and Suspension Trainer (Product ID: 13715) as part of its electronics engineering lab equipment range. It is a working electric power-assisted steering (EPAS) and front suspension trainer built from real vehicle components on a movable steel frame.

Quick Answer

The steering column, wheel, electric power steering rack and its ECU are fully working, so the motor assistance can be felt and measured. The sub-frame, torsion bar, wishbones and front hub show steering geometry and mounting, and jacks under the road wheels let the instructor load the suspension. A fault insertion panel adds up to 6 faults to the wiring without damaging the circuit. A 16-pin diagnostic socket accepts standard scan tools, a pin-out box with 2 mm sockets gives live voltage, resistance and frequency readings, and an ammeter shows the motor current. It runs on 12 V DC.

Key Specifications

ParameterDetail
SteeringElectric power-assisted rack with ECU, column and wheel
SuspensionSub-frame, torsion bar, wishbones, front hub
LoadingJacks under the road wheels
Fault insertionPanel with up to 6 faults
Diagnostics16-pin diagnostic socket; pin-out box with 2 mm sockets
MeteringAmmeter for motor current
Supply12 V DC
FrameBox-section steel frame on castors, powder-coated

Where This Is Used

Used in chassis systems and vehicle diagnostics courses. Keep fingers clear of the steering rack while the assistance motor is working. Related: Vehicle Electrical System Training Kit (Product ID: 13719). Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.

Frequently Asked Questions

How many faults can be inserted?
Up to 6, through the fault insertion panel.

Can a scan tool be connected?
Yes, through the 16-pin diagnostic socket.

What supply does it need?
12 V DC.

Related Categories

Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Electric Steering and Suspension Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us