Wind Power Generator Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13363
Indian Lab Suppliers supplies the Wind Power Generator (Product ID: 13363) as part of its electronics engineering lab equipment range. It is a 400 W off-grid wind turbine generator that charges a battery bank through a microcomputer-controlled charge controller.
Quick Answer
The 1.5 m rotor starts turning at 3 m/s, begins generating at 4 m/s, reaches rated output at 12 m/s, cuts out at 20 m/s and is built to survive 50 m/s. A permanent-magnet AC generator feeds a controller that rectifies and regulates the output for a 12, 24 or 36 V battery system, with a magnetic brake, a yaw damper and alarms for overcharge and low battery voltage. A photovoltaic input (200-300 W depending on system voltage) turns it into a wind-solar hybrid. A sine-wave inverter (distortion 3% or less) gives 220 V/50 Hz or 110 V/60 Hz with overload and battery protection. Please confirm at quotation whether the batteries, inverter and mast are supplied. The rotor is dangerous while turning: stop it with the brake before any work on the turbine.
Key Specifications
| Parameter | Detail |
|---|---|
| Rated power | 400 W |
| System voltage | 12, 24 or 36 V DC |
| Rotor diameter | 1.5 m |
| Wind speeds | Start-up 3 m/s; cut-in 4 m/s; rated 12 m/s; cut-out 20 m/s; survival 50 m/s |
| Operation | Off-grid, independent |
| PV input | 12 V: 200 W; 24 V: 200 W; 36 V: 300 W |
| Charge regulation | 14.5 V (12 V system); 29 V (24 V system); max charging current 18 A |
| Battery protection | Over-voltage 14.5 / 29 / 43 V; under-voltage 10.5 / 21 / 32 V |
| Inverter | Sine wave, distortion 3% or less; 220 V 50 Hz or 110 V 60 Hz |
| Overload cut-off | 25 s at 100-120%; 1 s at 120-200%; 0.1 s above 200% |
Where This Is Used
Used in renewable energy and electrical engineering labs to study wind energy conversion, battery charging and hybrid wind-solar systems. Related: Wind Tunnel System (Product ID: 13364) for controlled-airflow studies. Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
What is the cut-in wind speed?
4 m/s; the rotor starts turning at 3 m/s.
Can solar panels be added?
Yes, through the photovoltaic input, making a wind-solar hybrid system.
What AC output is available?
220 V/50 Hz or 110 V/60 Hz from the sine-wave inverter.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Wind Power Generator, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.jpeg)
.jpg)
.jpeg)
 (1).jpeg)