Educational Petrol Engine with Direct Injection System Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13546
Indian Lab Suppliers supplies the Educational Petrol Engine with Direct Injection System (Product ID: 13546) as part of its electronics engineering lab equipment range. It is a running 1.4 litre, four-cylinder in-line turbocharged petrol engine with direct injection, built as a closed teaching stand.
Quick Answer
Along with the engine and turbocharger the stand carries an instrument cluster, cooling, fuel supply and exhaust systems. Diagnosis runs through a 16-pin OBD socket with ECU identification, fault code reading and erasing, live data, actuator tests (control-unit dependent), throttle adaptation and coding. More than 30 faults are set by removing banana-plug jumpers on the wiring-diagram panel, where sensors, actuators and the ignition high-voltage circuit can be measured by oscilloscope or multimeter. Exhaust can be sampled before and after the catalytic converter.
Key Specifications
| Parameter | Detail |
|---|---|
| Engine | 1.4 litre, 4 cylinders in line, petrol direct injection, turbocharged |
| Diagnosis | 16-pin OBD socket: fault codes, live data, actuator test, adaptation, coding |
| Fault simulation | More than 30 faults via banana-plug jumpers |
| Measurement | Banana sockets for sensors, actuators and ignition HV circuit |
| Exhaust testing | Before and after catalytic converter |
| Safety | Removable guards over hot and rotating parts, emergency stop |
| Size (H × L × W) | Approx. 1550 × 1000 × 1200 mm |
| Weight | Approx. 300 kg |
Where This Is Used
It suits advanced engine-management teaching where boost control is part of the syllabus; the naturally aspirated version is Educational Petrol Engine with Direct Injection System (Product ID: 13545). Run only with exhaust extraction, guards in place and the turbocharger area treated as a hot surface. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
What engine is fitted?
A 1.4 litre in-line four-cylinder turbocharged petrol engine with direct injection.
How is it diagnosed?
Through the 16-pin OBD socket with a scan tool.
Can ignition signals be measured?
Yes, including the ignition high-voltage circuit.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Educational Petrol Engine with Direct Injection System, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpeg)
.png)
.png)
 (1).jpg)
.png)
.png)