CNC Mill Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-ELE-13941
Indian Lab Suppliers supplies the CNC Mill Trainer (Product ID: 13941) as part of its engineering lab equipment range. A three-axis CNC milling trainer with an industrial CNC controller, servo-driven X, Y and Z axes and an 8-station automatic tool changer.
Quick Answer
The controller (make to be confirmed at quotation) drives servo motors on X, Y and Z, with optically isolated inputs and TTL-compatible drives. It supports linear, circular and parabolic interpolation, helical milling, mirror imaging and slot and pocket milling cycles, programmed with standard G, M, S, T, F, I and K codes. The 1.5 HP spindle is driven by a DC thyristor drive with built-in protection and runs from 100 to 4000 rpm, with a size 30 steep taper. Resolution is 5 micron, repeatability 10 micron and rapid travel 5000 mm/min, with automatic lubrication. Use eye protection, clamp the workpiece firmly and keep hands clear of the rotating cutter; the machine runs on mains power and should be installed by a qualified electrician.
Key Specifications
| Parameter | Detail |
|---|---|
| Control | Industrial CNC controller (make to be confirmed) |
| Axis drives | Servo motor and drive on X, Y and Z |
| Spindle | 1.5 HP, DC thyristor drive, 100-4000 rpm, size 30 steep taper |
| Travel | X 250 mm; Y 175 mm; Z 250 mm |
| Table | Approx. 450 x 175 mm, 10 mm T-slots |
| Tool changer | Automatic, 8 station |
| Resolution / repeatability | 5 micron / 10 micron |
| Rapid travel | 5000 mm/min |
| Lubrication | Automatic |
| Size / weight | 850 x 850 x 1550 mm; 750 kg |
Where This Is Used
Used for CNC milling practice on slots, pockets, contours and helical paths. Related: CNC Engraving & Milling Console Trainer (Product ID: 13350) and the CNC Lathe Trainer (3 HP, industrial controller) (Product ID: 13940). Browse the full Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
How many axes are servo driven?
Three: X, Y and Z.
What is the table size?
About 450 x 175 mm with 10 mm T-slots.
Which milling cycles are supported?
Slot, pocket and helical milling.
Related Categories
Engineering Lab Equipment · Electronics Lab Equipment · Civil Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the CNC Mill Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.jpeg)
.png)