CNC Lathe Trainer With Servo Drives Manufacturer,Supplier and Exporter in India
.jpeg)
Product Code : SCL-ELE-13938
Indian Lab Suppliers supplies the CNC Lathe Trainer With Servo Drives (Product ID: 13938) as part of its engineering lab equipment range. A compact PLC-controlled CNC lathe trainer with a 2 HP VFD spindle, for teaching CNC programming and operation in smaller labs.
Quick Answer
The control supports linear, circular and parabolic interpolation, canned cycles, straight and taper threading and real-time tool path simulation, programmed with standard G, M, S, T, F, I and K codes. The spindle is driven by an AC motor and VFD at 50-3000 rpm, continuously variable. The product name refers to servo drives, but the specification describes stepper drives with ramp function on X and Z (optically isolated inputs, TTL-compatible drives, 10 micron resolution); please confirm the axis drive type at quotation. Lubrication is manual. Use eye protection, secure the workpiece and keep hands clear of the rotating chuck; the machine runs on mains power and should be installed by a qualified electrician.
Key Specifications
| Parameter | Detail |
|---|---|
| Control | PLC based, computer software control |
| Spindle | 2 HP AC motor with VFD, 50-3000 rpm, MT3 |
| X/Z drives | Stepper with ramp function as specified (name states servo; confirm at quotation) |
| Centre height / swing over carriage | 100 mm / 80 mm |
| Distance between centres | 250 mm |
| Z travel | 250 mm |
| Resolution | 10 micron (X and Z) |
| Rapid travel | 500 mm/min |
| Axis motor rating | 40 V, 4 A |
| Size / weight | 1100 x 750 x 1700 mm; 350 kg; manual lubrication |
Where This Is Used
Used where lab space is limited, for introductory CNC turning. The 1.5 HP version is the CNC Lathe Trainer (1.5 HP) (Product ID: 13939); for servo axes with a tool changer see the CNC Lathe Trainer - Slant Bed (Product ID: 13937). Browse the full Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What resolution do the axes have?
10 micron on X and Z.
How is the machine lubricated?
Manually.
Are the axes servo or stepper driven?
The specification describes stepper drives; please confirm at quotation.
Related Categories
Engineering Lab Equipment · Electronics Lab Equipment · Civil Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the CNC Lathe Trainer With Servo Drives, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.png)
.jpeg)