CNC Lathe Trainer Manufacturer,Supplier and Exporter in India
.jpeg)
Product Code : SCL-ELE-13936
Indian Lab Suppliers supplies the CNC Lathe Trainer (Product ID: 13936) as part of its engineering lab equipment range. A PLC-controlled CNC lathe trainer with a VFD spindle drive and stepper-driven X and Z axes, for teaching CNC turning and part programming.
Quick Answer
Students write programs with standard G and M codes and S, T, F, I and K words, check them with real-time tool path simulation and then cut on the machine. The control supports linear, circular and parabolic interpolation, canned cycles, and straight and taper threading. The 2 HP spindle runs at continuously variable speeds from 50 to 3000 rpm through an AC motor and VFD, and the axes resolve to 5 micron. Power devices are protected against short circuit and over-temperature. Use eye protection, secure the workpiece and keep hands clear of the rotating chuck; the machine runs on mains power and should be installed by a qualified electrician.
Key Specifications
| Parameter | Detail |
|---|---|
| Control | PLC based, computer software control |
| Spindle | 2 HP AC motor with VFD, 50-3000 rpm, continuously variable, MT3 taper |
| X/Z drives | Stepper drives with ramp function |
| Centre height | 100 mm |
| Swing over carriage | 80 mm |
| Distance between centres | 300 mm |
| Z travel | 310 mm |
| Resolution | 5 micron (Z); 5 micron on diameter (X) |
| Rapid travel | 700 mm/min |
| Size / weight | 1300 x 800 x 1400 mm; 800 kg |
Where This Is Used
Used in engineering college and polytechnic workshops for CNC turning practice. A 1.5 HP stepper version is the CNC Lathe Trainer (1.5 HP) (Product ID: 13939); for servo axes and an 8-station tool changer see the CNC Lathe Trainer - Slant Bed (Product ID: 13937). Browse the full Engineering Lab Equipment range or related Electronics Lab Equipment products.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying this CNC lathe trainer alongside its wider engineering lab equipment range, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
What drives the X and Z axes?
Stepper drives with a ramp function.
What is the spindle speed range?
50 to 3000 rpm, continuously variable.
Can programs be checked before cutting?
Yes, with real-time tool path simulation.
Related Categories
Engineering Lab Equipment · Electronics Lab Equipment · Civil Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the CNC Lathe Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.jpeg)
.jpeg)