Whole Vehicle Electric Training Platform Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13579
Indian Lab Suppliers supplies the Whole Vehicle Electric Training Platform (Product ID: 13579) as part of its electronics engineering lab equipment range. It is a complete car electrical system on one enclosed mobile panel, with a motor standing in for the engine so starting, charging and ignition can run.
Quick Answer
The panel carries the engine anti-theft, ignition, instrument, lighting, wiper, horn, electric window, door lock, audio, starting and charging systems, beside colour circuit diagrams printed on an aluminium-plastic composite board. Test terminals give resistance, voltage, current and frequency readings, and an OBD socket connects a scan tool to the engine ECU, instrument cluster and comfort unit for coding, fault codes, data streams, waveforms, component tests and key matching. A 2.2 kW, 1420 r/min three-phase motor drives the engine-side parts. The rig takes 380 V ±10%, 50 Hz three-phase and works at 12 V DC.
Key Specifications
| Parameter | Detail |
|---|---|
| Systems | Anti-theft, ignition, instruments, lighting, wipers, horn, windows, door locks, audio, starting, charging |
| Supply | 380 V ±10%, 50 Hz, three-phase 3/4/5-wire |
| Working voltage | 12 V DC |
| Drive motor | Three-phase asynchronous, 2.2 kW, 1420 r/min, 220/380 V |
| Measurement | Test terminals: resistance, voltage, current, frequency |
| Diagnosis | OBD socket: ECU, instrument cluster, comfort unit |
| Cabinet | 1.5 mm pressed cold-rolled sheet, rear service door |
| Frame and castors | 40 × 40 × 3 mm square steel tube, 100 × 60 mm locking castors |
| Working temperature | −40 to +50 °C |
Where This Is Used
It gives a whole-vehicle view before single-system boards such as the Automobile CAN-BUS System Instruction Board (Product ID: 13580) and Charging System Instruction Board (Product ID: 13587). The three-phase supply must be earthed and installed by an electrician; keep the rear door closed while the motor runs. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which diagnostic functions are possible?
Coding, fault codes, data streams, waveforms, component tests and key matching.
What supply does it need?
380 V ±10%, 50 Hz three-phase.
What can be measured at the terminals?
Resistance, voltage, current and frequency.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Whole Vehicle Electric Training Platform, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
 - Static (1).jpg)
.jpg)
.png)
.png)
.png)
.jpeg)