VLSI / Embedded System Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13145
Indian Lab Suppliers supplies the VLSI / Embedded System Trainer (Product ID: 13145) as part of its electronics engineering lab equipment range. It is a mother-board trainer for VLSI and embedded-system work, built to take one of several target devices, from CPLD and FPGA to ARM7, 8051-family, PIC and AVR microcontrollers.
Quick Answer
The mother board has a 16 MHz crystal clock source, 48 I/O lines on two 26-pin FRC headers, an RS-232C port, a 25-pin parallel connector for JTAG programming and a USB-to-serial interface. In-circuit programming runs through the COM, LPT (JTAG) or USB port as applicable, and I2C and SPI buses are provided. For hands-on I/O there are 16 bicolour status LEDs, 8 push buttons, 8 DIP switches with indicators, a 0-5 V potentiometer for the ADC input, a variable slow clock (2-64 Hz) and a speaker interface (8 Ω, 0.5 W). A 3 V lithium cell backs up the RTC, and the user guides cover both C and assembly-language programming.
Key Specifications
| Parameter | Detail |
|---|---|
| Target devices (one per unit) | CPLD, FPGA, ARM7, 89C51RD2, PIC16F, PIC18F, AVR (ATmega328P) and others |
| Clock | 16 MHz crystal, multi-output |
| I/O | 48 lines on 2 × 26-pin FRC headers |
| Communication | RS-232C (9-pin D), USB-to-serial, 25-pin parallel for JTAG, I2C, SPI |
| Display | Backlit LCD: 16 × 2, jumbo 16 × 2, 20 × 4 or 40 × 2 (choose one) |
| On-board supplies | +3.3 V, variable 1.25-2.5 V and 3.1-4.2 V |
| User I/O | 16 bicolour LEDs, 8 push buttons, 8 DIP switches, 0-5 V pot, 2-64 Hz slow clock |
| Power supply options | 5 V / 2.5 A SMPS, or with +12 V / 850 mA and -12 V / 250 mA |
| Enclosure | 215 (L) × 165 (W) × 75 (H) mm, 900 g (1.5 kg with manuals) |
Where This Is Used
Optional extras include a PC keyboard interface, a 640-tie-point breadboard in place of the I2C EEPROM, RTC and SPI memory, temperature sensors, and plug-in modules such as VGA, Ethernet, RS485, Bluetooth, ZigBee, 128 × 64 graphic LCD, touch panel, IR transceiver and SD card. Its enclosure, display and SMPS options match those of Microprocessor / Microcontroller Trainer (Product ID: 13144). Please confirm the target device, display and power-supply options at quotation. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which chip does the trainer use?
One target per unit: CPLD, FPGA, ARM7, 89C51RD2, PIC16F/18F, AVR and others; confirm at quotation.
Which languages are covered?
The user guides cover C and assembly-language programming.
How is the device programmed?
In circuit, through the COM, LPT (JTAG) or USB port as applicable.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the VLSI / Embedded System Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
 Cutaway Model (1).jpg)
.jpg)
.png)