Discrete Component Trainer with power supply, oscillator and 3 multi range meters Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12199
Indian Lab Suppliers supplies the Discrete Component Trainer with power supply, oscillator and 3 multi range meters (Product ID: 12199) as part of its electronics engineering lab equipment range. It is an open experiment board with a large stock of discrete components, several AC and DC supplies, a 1 kHz sine source and three meters for building and testing circuits.
Quick Answer
Supplies include 4.5-0-4.5 V AC at 500 mA, 0–5 V AC at 50 mA, a continuously variable 0–70 V DC at 50 mA, ±12 V DC at 250 mA (short-circuit protected), 0–20 V DC at 50 mA and 5 V DC at 100 mA. The parts stock covers 7 transistors, a matched pair, 2 FETs, UJT, SCR, TRIAC, DIAC, 8 diodes, 5 Zeners, 67 resistors, 27 capacitors, 6 potentiometers, an audio transformer, speaker, electronic load and a 12 V relay. Students can design circuits beyond the described experiments from these parts. A sine/square wave oscillator and a 20 MHz oscilloscope are also required; please confirm the lower ammeter ranges at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| AC supplies | 4.5-0-4.5 V at 500 mA; 0–5 V at 50 mA |
| DC supplies | 0–70 V at 50 mA variable; ±12 V at 250 mA; 0–20 V at 50 mA; 5 V at 100 mA |
| Signal sources | 1 kHz sine, variable level; dual-polarity pulser |
| AC/DC voltmeter | 65 mm dial, 1 V / 10 V / 100 V |
| DC ammeters | Two, 65 mm dial, switch-selectable ranges up to 500 mA |
| Components | 7 transistors, matched pair, 2 FETs, UJT, SCR, TRIAC, DIAC, 8 diodes, 5 Zeners, 67 resistors, 27 capacitors, 6 pots |
| Relay | 12 V, one changeover, 6 A resistive / 3 A inductive at 230 V |
| Mains | 230 V ±10%, 50 Hz; fuse, neon indicator |
| Also required | Sine/square wave oscillator, 20 MHz CRO |
Where This Is Used
Used for open-ended circuit work in diploma and degree electronics labs. A smaller board with a numbered list of 23 core and 11 optional experiments is Discrete Component Trainer (Product ID: 12200); for device curves, see Semi-Conductor Devices Characteristics with power supply and 3 multi range meters (Product ID: 12197). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Can students build their own circuits?
Yes, the parts and supplies allow circuits beyond the described experiments.
Which signal sources are built in?
A 1 kHz sine source with variable level and a dual-polarity pulser.
What else is needed?
A sine/square wave oscillator and a 20 MHz oscilloscope.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Discrete Component Trainer with power supply, oscillator and 3 multi range meters, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.png)
.jpg)