Universal Embedded Trainer Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13212
Indian Lab Suppliers supplies the Universal Embedded Trainer (Product ID: 13212) as part of its electronics engineering lab equipment range. It is a universal trainer board for FPGA-based digital design, with plug-in FPGA daughter boards and an on-board USB JTAG programmer.
Quick Answer
FPGA devices fit on plug-in daughter boards, with XC3S50 and XC3S400 boards offered as options, and are configured from a PC through the on-board USB JTAG programmer. Students test designs on 16 I/O LEDs, a six-digit seven-segment display, a 16 × 2 backlit LCD, two LED dice and an 8 × 8 dot-matrix display. Inputs come from two 8-way DIP switches, 8 push buttons with LEDs, a 5 × 4 keypad and six debounced pulse switches (three high-to-low, three low-to-high). The board also carries a stepper motor, relay, buzzer, RS-232 port and DC supplies. The product name reads Universal Embedded Trainer while the specification describes an FPGA (VLSI) trainer; please confirm the configuration and the daughter boards required at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| FPGA boards | Plug-in daughter boards; XC3S50 or XC3S400 (optional) |
| Programming | On-board USB JTAG programmer |
| Outputs | 16 LEDs, six-digit seven-segment, 16 × 2 backlit LCD, two LED dice, 8 × 8 dot matrix |
| Inputs | 2 × 8-way DIP switches, 8 push buttons with LEDs, 5 × 4 keypad |
| Pulse switches | 3 high-to-low and 3 low-to-high, LED indicated |
| Other | Stepper motor, relay, buzzer, RS-232, DC supplies |
Where This Is Used
Compare the Universal VLSI (FPGA/CPLD) Trainer (Product ID: 13223); daughter boards are listed as the Piggy Back Module for XILINX FPGA XC3S50 (Product ID: 13224) and the Piggy Back Module for XILINX FPGA XC3S400 (Product ID: 13225). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
How is the FPGA configured?
From a PC through the on-board USB JTAG programmer.
Are FPGA boards included?
XC3S50 and XC3S400 daughter boards are optional; specify them at quotation.
What are the pulse switches for?
They give clean single edges, high-to-low or low-to-high, for clocking sequential circuits.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Universal Embedded Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpeg)
.png)
.png)
.png)