Universal VLSI (FPGA/CPLD) Trainer Manufacturer,Supplier and Exporter in India
 Trainer (1).jpg)
Product Code : SCL-EELE-13223
Indian Lab Suppliers supplies the Universal VLSI (FPGA/CPLD) Trainer (Product ID: 13223) as part of its electronics engineering lab equipment range. It is an FPGA/CPLD base board for implementing and testing digital designs, taking plug-in device modules.
Quick Answer
A plug-in FPGA or CPLD module is configured through the on-board ISP programmer, and the design is then exercised on a well-equipped board. Inputs come from 16 DIP switches with logic-level LEDs and a 5 × 4 key matrix; outputs go to 16 LEDs, a 4-digit seven-segment display and a 16 × 1 alphanumeric LCD. Mixed-signal and peripheral work uses an ADC0809 8-bit ADC, a DAC0800 8-bit DAC, stepper motor, relay, PS/2, RS-232 and VGA interfaces. Clocks of 50 MHz, 10 MHz, 5 MHz, 1 MHz, 100 kHz and 100 Hz are generated on board, with selectable 5 V, 3.3 V, 2.5 V, 1.5 V and 1.2 V device supplies. A manual with 25 sample experiment programs is included. Please confirm the device modules required and the mains input of the built-in supply at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Device modules | Plug-in FPGA/CPLD modules, on-board ISP programmer |
| Inputs | 16 DIP switches (2 × 8-way) with LEDs; 5 × 4 key matrix |
| Outputs | 16 LEDs, 4-digit seven-segment, 16 × 1 LCD |
| Analog | ADC0809 8-bit ADC, DAC0800 8-bit DAC |
| Interfaces | Stepper motor, relay, PS/2, RS-232, VGA; 26-pin FRC expansion |
| Clock sources | 50 MHz, 10 MHz, 5 MHz, 1 MHz, 100 kHz, 100 Hz |
| Device supply | 5 V, 3.3 V, 2.5 V, 1.5 V, 1.2 V selectable |
| Built-in supply | 5 V / 1.5 A, ±12 V / 250 mA |
| Other | Power-on and configuration reset keys, ICs in sockets, wooden enclosure |
| Supplied with | Manual with 25 sample experiment programs |
Where This Is Used
Device modules include the Piggy Back Module for XILINX FPGA XC3S50 (Product ID: 13224) and the Piggy Back Module for XILINX CPLD XC9572 (Product ID: 13226). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Which devices can be used?
FPGA and CPLD devices on plug-in modules.
What clock frequencies are available?
50 MHz, 10 MHz, 5 MHz, 1 MHz, 100 kHz and 100 Hz.
Can designs drive a monitor?
Yes, a VGA interface is provided.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Universal VLSI (FPGA/CPLD) Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.jpeg)
.png)
.png)
.jpeg)
.png)
.jpeg)