Triggering Circuits for SCR with Power Supply Manufacturer,Supplier and Exporter in India

Triggering Circuits for SCR with Power Supply

Product Code : SCL-EELE-12895

Indian Lab Suppliers supplies the Triggering Circuits for SCR with Power Supply (Product ID: 12895) as part of its electronics engineering lab equipment range. It compares the three basic ways of firing an SCR, resistance, RC and UJT triggering, and applies them in half-wave and full-wave controlled rectifiers.

Quick Answer

Students start with R triggering, where firing can be delayed by no more than 90°, move to RC triggering for a wider range, and then use a UJT relaxation oscillator coupled through a 1:1 pulse transformer for sharp, isolated gate pulses. The same circuits are then used to build half-wave and full-wave controlled rectifiers with the two SCRs. A 35 V AC, 100 mA supply and a bridge rectifier provide the working voltages; separate potentiometers set the SCR and UJT firing angles, and two more vary the load. The board runs from 230 V ±10%, 50 Hz mains.

Key Specifications

ParameterDetail
ExperimentsR, RC and UJT triggering; half-wave and full-wave controlled rectifiers
Devices2 SCRs; UJT; pulse transformer 1:1
Supply35 V AC, 100 mA; bridge rectifier
ControlsSCR and UJT firing-angle potentiometers; 2 load potentiometers
Mains230 V ±10%, 50 Hz; ON/OFF switch, fuse and indicator lamp
Connections4 mm stackable patch cords, 0.5 m

Where This Is Used

A starting board for thyristor labs, followed by the Study of UJT and UJT Relaxation Oscillator with Power Supply (Product ID: 12879) and the UJT Firing Circuit of SCR with Power Supply (Product ID: 12911). An oscilloscope is needed to view gate and load waveforms. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Frequently Asked Questions

Which triggering method gives the widest control?
UJT triggering, which also gives sharp pulses with isolation.

What limits R triggering?
Firing can be delayed only up to 90° of the supply cycle.

How many SCRs are fitted?
Two.

Related Categories

Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment

Request a Quote

For pricing, bulk quantities or tender documentation on the Triggering Circuits for SCR with Power Supply, reach our team via Contact Us or submit your requirement through our Tenders page.

   

Office Address

Works: #975 Malleshwaram,
Bengaluru, Karnataka 560003

[email protected]

Follow Us