Refrigeration & AC Trainer Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-CE-12651
Indian Lab Suppliers supplies the Refrigeration & AC Trainer (Product ID: 12651), part of the Communication Equipment range under Laboratory equipment, an aluminium-profile table-top instrumentation trainer combining a computer-interfaced data-acquisition panel with refrigeration-cycle components (evaporator, condenser and pressure/temperature sensing) for studying air-conditioning system operation.
Note on scope: as documented, the source specification mixes a generic instrumentation/data-acquisition panel (power supply, multichannel DPM, ADC/DAC and V-to-I/I-to-V function blocks, USB interface) — of the kind also used across other process-control trainers in our range — with refrigeration-cycle component descriptions. The "Accumulator" entry in the source describes a nitrogen-charged hydraulic accumulator (with pressures quoted in psi, typical of a hydraulic system) rather than a refrigeration-cycle accumulator, and the Evaporator block's height dimension is not given in the source. These are presented below exactly as documented; please confirm the actual scope of supply and these figures with our engineering team before ordering.
Quick Answer
This is a table-top refrigeration and air-conditioning trainer that pairs a computer-interfaced instrumentation panel (power supply, multichannel digital panel meter, ADC/DAC and signal-conditioning blocks, USB interface) with physical evaporator, condenser and pressure/temperature sensing modules, so students can study how an AC/refrigeration cycle works and acquire live process data on a PC.
Key Features
Aluminium profile, sturdy flat-panel table-top construction, with high-voltage components housed in plastic enclosures to minimise shock risk · Instrumentation power supply cum multichannel DPM panel for digital display of process parameters · 20-pin FRC power bus to supply neighbouring panels · Computer Interface Panel (CIP) connecting to a PC's parallel port via a 25-pin cable (1.5m), with 4 ADC channels, 1 DAC channel, a V-to-I function block and an I-to-V function block · USB converter to interface the CIP's 25-pin D connector to USB via a microcontroller-based adaptor · Optional square root extractor hardware module for PLC/panel-mount PID interfacing · Evaporator module demonstrating how a refrigerant such as R-22 or R-134a evaporates from liquid to gas while absorbing heat · Condenser module demonstrating rejection of heat as refrigerant vapour condenses back to liquid · Pressure/Temperature sensor panel with 7 independent signal-conditioning blocks and span/zero adjustment
Key Specifications
| Instrumentation Power Supply / DPM Panel | |
|---|---|
| Regulated Outputs | ±12V/500mA, +5V/300mA, 13V/3A |
| Unregulated Output | 17V DC/750mA |
| Power Bus | 20-pin FRC bus to neighbouring panels |
| Computer Interface Panel (CIP) | |
| PC Connection | 25-pin M-to-F cable, 1.5m, via parallel port |
| ADC Channels | 4 channels, 0 to 2.5V FS, with 1 input simulation pot |
| DAC Channel | 1 channel, 0 to 2.5V FS |
| V-to-I Function Block | Input 0-2.5V, output 0-20 or 4-20mA (switch-settable, 100W load) |
| I-to-V Function Block | Input 4-20mA, output 0-2.5V |
| USB Converter | 25-pin D connector to USB, microcontroller-based, Type A to mini B cable |
| Refrigeration Cycle Modules | |
| Evaporator Block Size | 605 (L) x 200 (W) mm x height not specified in source |
| Condenser Block Size | 330 (L) x 105 (W) x 250 (H) mm |
| Pressure/Temperature Sensor Panel | 7 independent channels, 0-2.5V DC FS output, span/zero adjustment |
| Accumulator Mechanical Dimension | 1170 (L) x 300 (W) x 990 (H) mm (as documented, see note above) |
| General | |
| Net Weight | 110 kg |
Scope of Supply
Refrigeration & AC Trainer main unit · Instrumentation power supply cum multichannel DPM panel · Computer Interface Panel (CIP) with connecting cable · USB converter · Evaporator, Condenser and Accumulator modules · Pressure/Temperature sensor panel · Square root extractor module (optional)
Where This Is Used
This trainer is used in mechanical, refrigeration and instrumentation engineering labs to teach air-conditioning cycle operation alongside computer-based data acquisition; see also our Electronics Lab Equipment and Engineering Lab Equipment ranges.
Why Buy from Indian Lab Suppliers
Indian Lab Suppliers is an India-based laboratory equipment manufacturer and exporter supplying this Refrigeration & AC Trainer alongside its broader Communication Equipment catalog, with documentation such as a Certificate of Origin available on request for institutional and export orders.
Frequently Asked Questions
What does the Refrigeration & AC Trainer (Product ID 12651) let students study?
It lets students study the air-conditioning/refrigeration cycle through physical evaporator, condenser and pressure/temperature sensing modules, while a computer interface panel and DAQ instrumentation allow live process parameters to be logged on a PC.
Can it be connected to a PC?
Yes, the Computer Interface Panel connects to a PC's parallel port via a 25-pin cable, and a USB converter is provided to interface this to USB via a microcontroller-based adaptor.
Is the "Accumulator" module refrigerant-specific?
As documented, the accumulator specification describes a nitrogen-charged hydraulic accumulator rather than a refrigeration-specific one; please confirm the exact component with our team before ordering.
Related Categories
Laboratory · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Refrigeration & AC Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
 (1).jpg)
.png)
.jpg)
.png)