Voltage Commutated Thyristorised Chopper with Power Supply Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12907
Indian Lab Suppliers supplies the Voltage Commutated Thyristorised Chopper with Power Supply (Product ID: 12907) as part of its electronics engineering lab equipment range. It is a step-down DC chopper using a main and an auxiliary SCR, in which the main SCR is turned off by applying a reverse voltage from a charged capacitor.
Quick Answer
A UJT relaxation oscillator, op-amp, timer IC and hex inverter generate the gate pulses, which two NPN transistors deliver through two 1:1:1 pulse transformers to the main and auxiliary SCRs. Firing the auxiliary SCR places the commutating capacitor across the main SCR, reverse-biasing it and ending each on-period, so varying the on-time changes the average output. The load is a 12 V, 6 W bulb with inductors and a freewheeling diode, and two SPST switches and a push-to-ON switch set up and start the circuit. Supplies are ±12 V DC and 5 V DC at 100 mA regulated, with a bridge rectifier for the DC input; the board runs from 230 V ±10%, 50 Hz mains.
Key Specifications
| Parameter | Detail |
|---|---|
| Type | Step-down, voltage commutated |
| Power devices | 2 SCRs (main and auxiliary); freewheeling diode; inductors |
| Pulse generation | UJT, op-amp, timer IC, hex inverter; 2 NPN transistors; 2 pulse transformers 1:1:1 |
| Switches | 2 SPST; push-to-ON |
| Load | Bulb, 12 V, 6 W |
| Supplies | ±12 V DC and 5 V DC, 100 mA regulated; bridge rectifier |
| Mains | 230 V ±10%, 50 Hz; ON/OFF switch, fuse and indicator lamp |
| Connections | 4 mm stackable patch cords, 0.5 m |
Where This Is Used
Studied alongside the Current Commutated Thyristorised Chopper with Power Supply (Product ID: 12908) and the D.C. Step down MOSFET Chopper with Power Supply (Product ID: 12922). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
How is the main SCR turned off?
A charged capacitor switched by the auxiliary SCR applies reverse voltage across it.
What controls the output voltage?
The ratio of on-time to period of the chopper.
What is the load?
A 12 V, 6 W bulb with inductors.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Voltage Commutated Thyristorised Chopper with Power Supply, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
 Trainer (1).jpg)
.png)
.jpeg)
.jpeg)
.png)