Switch Gear Assembly Area Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12795
Indian Lab Suppliers supplies the Switch Gear Assembly Area (Product ID: 12795) as part of its electronics engineering lab equipment range. It is a switchgear panel with contactors, relays, timers, MCBs, push buttons and meters for wiring and testing motor-control circuits.
Quick Answer
The panel carries four contactors (230 V AC coil, 9 A, with 2 NO + 2 NC auxiliaries), two relays and two timers with four changeover contacts each, a 10 A four-pole MCB and two 10 A single-pole MCBs, forward, reverse, start and stop push buttons, an audio-visual continuity tester, and 96 × 96 mm AC/DC meters (0–10 A and 0–500 V). Students first identify each component and then wire logic (AND, OR, NOT) and latching circuits, DOL, star-delta and forward/reverse starters, a fault alarm with reset, and on-delay and off-delay timing. It runs from 415 V ±10%, 50 Hz three-phase mains with 15 A coloured terminals, so it must be earthed and wired only with the supply isolated, under qualified supervision.
Key Specifications
| Parameter | Detail |
|---|---|
| Contactors | 4, 230 V AC coil, 9 A, 2 NO + 2 NC auxiliaries |
| Relays | 2, 230 V AC coil, 4 changeover contacts |
| Timers | 2, 230 V AC, 4 changeover contacts |
| MCBs | 1 × 4-pole 10 A; 2 × 1-pole 10 A |
| Push buttons | Forward, reverse, start, stop |
| Meters | AC/DC ammeter 0–10 A and voltmeter 0–500 V, 96 × 96 mm |
| Tester | Audio-visual continuity tester |
| Mains | 415 V ±10%, 50 Hz, three phase |
| Terminals | 15 A coloured |
Where This Is Used
Used in electrical workshops and switchgear labs to build real starter circuits before working on machines such as those in the Electrical Machine Trainers (Product ID: 12790). See also the Generator Protection Relay Trainer (Product ID: 12793). Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
Which starters can be wired?
DOL, star-delta and forward/reverse starters.
What timing circuits are covered?
On-delay and off-delay operation using the two timers.
What supply is required?
415 V ±10%, 50 Hz three-phase mains.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Switch Gear Assembly Area, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.png)
.jpeg)
.png)