Study of R.C. Transmission Line at 50 Hz with power supply Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12235
Indian Lab Suppliers supplies the Study of R.C. Transmission Line at 50 Hz with power supply (Product ID: 12235) as part of its electronics engineering lab equipment range. It is a 20-section R-C ladder network for studying how voltage magnitude and phase change along a transmission line at 50 Hz.
Quick Answer
Twenty T-sections of resistance and capacitance are brought out to sockets, so students can measure the voltage after every section for different input voltages and plot magnitude and phase along the ladder to find the attenuation. Over the 20 sections the phase shift approaches 2π. The input comes from a transformer with 50, 100 and 200 V AC tappings at 200 mA, and a 3¾-digit digital multimeter is required for readings. The tappings reach 200 V AC, so all connections must be made with the supply off and under supervision.
Key Specifications
| Parameter | Detail |
|---|---|
| Network | 20 T-sections of R and C on sockets |
| AC source | Transformer taps 50, 100, 200 V AC at 200 mA |
| Frequency | 50 Hz mains |
| Results | Magnitude and phase along the line; attenuation |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse, jewel light |
| Patch cords | Stackable, 4 mm spring-loaded plugs, 0.5 m |
| Also required | 3¾-digit digital multimeter |
Where This Is Used
Used in physics and electrical engineering practicals on distributed networks and line attenuation. Related: Study of R.C. circuit with an ultra low frequency AC source with power supply and 3 centre 0 meters (Product ID: 12252) and Determination of Impedance of R-C Circuits at Different Frequencies with 2 dual range meters (Product ID: 12229). Browse the full Electronics Engineering Lab Equipment range or related Electricity and Magnetism products.
Frequently Asked Questions
How many sections does the line have?
20 T-sections of R and C.
What total phase shift is seen?
Close to 2π over the 20 sections at 50 Hz.
Which input voltages are available?
50, 100 and 200 V AC taps at 200 mA.
Related Categories
Electronics Engineering Lab Equipment · Electricity and Magnetism · Physics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Study of R.C. Transmission Line at 50 Hz with power supply, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)