Sample Bottle, Plastic, 100ml, Barcode Manufacturer,Supplier and Exporter in India
Product Code : ILS-WT-11449
Indian Lab Suppliers manufactures and supplies the Sample Bottle, Plastic, 100ml, Barcode (Product ID: 11449) as part of its Water Testing range under Water and Sanitation equipment. This is a laboratory-standard plastic water sample bottle with a fixed barcode for sample tracking, sized at 100ml with a precise fill line, suited to arsenic, fluoride and other chemical water-parameter testing.
Quick Answer
This 100ml barcoded sample bottle is designed for collecting smaller water samples for chemical testing (arsenic, fluoride and similar parameters), with a precise 100ml fill line and roughly 20ml of extra headspace above it. Because it's for chemical rather than microbiological testing, it does not need to be supplied sterile.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 11449 |
| Material | Laboratory-standard plastic |
| Net capacity | 100 ml, with a precise 100ml fill line |
| Gross capacity | Slightly higher than 100 ml, with approx. 20 ml of headspace above the fill line |
| Identification | Fixed barcode for sample tracking |
| Sterility | Not required to be sterile — intended for chemical parameter testing, not microbiological sampling |
| Typical use | Arsenic, fluoride and other chemical parameter testing in presumed drinking water |
Where This Bottle Is Used
This smaller 100ml barcoded bottle suits chemical tests that need less sample volume than the 250ml version, such as arsenic screening with the Arsenator/Digital Arsenic Reader or the Arsenic Test Kit, Extended Range. For larger-volume chemical sampling, see the Sample Bottle, Plastic, 250ml, Barcode. This bottle is not intended for microbiological sampling, which requires a sterile container.
Frequently Asked Questions
What is this bottle used for?
Collecting smaller-volume water samples for chemical parameter testing — such as arsenic and fluoride — with a fixed barcode for tracking each sample.
Does the bottle need to be sterile?
No — because it is intended for chemical parameter testing in presumed drinking water rather than microbiological sampling, sterility is not required.
What is the capacity and is there a fill line?
100ml net capacity, with a precise 100ml fill line and roughly 20ml of extra headspace above it.
How is this different from the 250ml Sample Bottle?
Both are barcoded chemical-testing bottles of the same non-sterile, standard-laboratory design; this one holds 100ml, while the Sample Bottle, Plastic, 250ml, Barcode holds 250ml with graduations at 100ml, 200ml and 250ml.
Related Products
Sample Bottle, Plastic, 250ml, Barcode · Arsenator/Digital Arsenic Reader · Arsenic Test Kit, Extended Range · Portable Water Test Kit, Adv., Physico-Chemical · Photometer Reagents Kit
Related Categories
Water Testing · Water and Sanitation · Water Treatment · Water Distribution-Fittings · Sanitation & Hygiene
Request a Quote
For pricing, bulk quantities or tender documentation on the Sample Bottle, Plastic, 100ml, Barcode, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpg)
 (1).jpg)
