Industrial / DCS / SCADA Trainer with Wireless Intelligent Controller Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13353
Indian Lab Suppliers supplies the Industrial / DCS / SCADA Trainer with Wireless Intelligent Controller (Product ID: 13353) as part of its electronics engineering lab equipment range. It is a workbench trainer built round a 32-bit industrial controller for PLC programming, distributed control and SCADA communication practice.
Quick Answer
The controller runs a soft-logic PLC runtime programmed in Instruction List, Structured Text, Ladder Diagram, Function Block Diagram and Sequential Function Chart. It talks Modbus RTU, Modbus TCP and DNP3 over one RS232 (DB9), one RS485 (terminal block), two 10/100 Mbps Ethernet ports, Wi-Fi 802.11 b/g/n and GPRS. Eight differential analogue inputs (16-bit, ±10 V or 4-20 mA) and eight sink-type wet-contact digital inputs (40 V DC protection, per-channel LEDs) sit on banana sockets, each group isolated to 2000 V DC, with a diagnostic test signal. A 24 V, 6 A supply, breakout panels for the I/O and space for DIN-rail units are fitted on an ESD-protective bench. Example PLC programs and PC-based experiments are included; please confirm the programming software licences, output channels and mains supply at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Controller | 32-bit processor, soft-logic PLC runtime |
| Languages | IL, ST, LD, FBD, SFC |
| Protocols | Modbus RTU, Modbus TCP, DNP3 |
| Ports | 1 x RS232 (DB9), 1 x RS485 (terminal block), 2 x RJ-45 10/100 Mbps |
| Wireless | Wi-Fi 802.11 b/g/n, GPRS; 15 cm external dipole antenna (optional) |
| Analogue inputs | 8 differential, 16-bit, ±10 V / 4-20 mA, 2000 V DC isolation |
| Digital inputs | 8 sink type, wet contact, 40 V DC protection, 2000 V DC isolation, LED per channel |
| Bench | ESD-protective workbench, 24 V 6 A supply, I/O breakout panels, DIN-rail provision |
Where This Is Used
Used in industrial automation, process control and SCADA courses. Related: Transducer & Instrumentation Trainer - Exhaustive Practical Course (Product ID: 13342) for the sensor side of a control loop. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which PLC languages are supported?
Instruction List, Structured Text, Ladder Diagram, Function Block Diagram and Sequential Function Chart.
Which communication protocols can be practised?
Modbus RTU, Modbus TCP and DNP3 over serial, Ethernet, Wi-Fi or GPRS.
What analogue signals can be connected?
Eight differential inputs accepting ±10 V or 4-20 mA, at 16-bit resolution.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Industrial / DCS / SCADA Trainer with Wireless Intelligent Controller, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)
.png)
.png)
.png)
.png)