Filter Support, Plastic Manufacturer,Supplier and Exporter in India
Product Code : ILS-WT-11452
Indian Lab Suppliers manufactures and supplies the Filter Support, Plastic (Product ID: 11452) as part of its Water Testing range under Water and Sanitation equipment. This is a reusable plastic membrane filter support that holds a 47mm diameter (0.45 micron) paper filter on top of a Buchner-type flask, completing a membrane-filtration set up for drinking water testing.
Quick Answer
This plastic filter support sits on a silicone rubber gasket on top of a side-arm (Buchner-type) flask, interfacing with a standard filter funnel — such as a standard Millipore filter funnel — to hold a 47mm diameter (0.45 micron) paper filter during vacuum filtration. It is a reusable component, cleaned with an ethanol wipe between uses rather than a single-use consumable.
Key Specifications
| Parameter | Detail |
|---|---|
| Product ID | 11452 |
| Material | Plastic |
| Supported filter size | 47 mm diameter (0.45 micron) paper filter |
| Seating | Sits on a silicone rubber gasket placed on top of the flask's side-arm tabulation |
| Reusability | Reusable — cleaned by ethanol wipe between uses |
| Interfaces with | Standard filter funnel (e.g. standard Millipore filter funnel) and an off-the-shelf side-arm (Buchner or similar) filtration flask, plus a vacuum pump |
Where This Filter Support Is Used
This filter support is the component that carries the membrane filter in a drinking-water membrane-filtration set up, sitting between the filter funnel and the flask. It is used together with Indian Lab Suppliers' Flask, Thick Wall, W/Sidearm, 250ml, Tube, Rubber, F/Vacuum Filtration and Stand, Vacuum Filter Support, 1-Place SS to complete a coliform or bacteriological filtration set for standard laboratory glassware-based testing.
Frequently Asked Questions
What is this filter support used for?
Holding a 47mm diameter (0.45 micron) paper filter in place on top of a side-arm flask during membrane filtration for drinking water testing.
What size filter paper does it take?
A standard 47mm diameter, 0.45 micron paper filter.
Is this a single-use or reusable component?
It's reusable — the filter support can be cleaned with an ethanol wipe between uses rather than discarded.
What else do I need to complete the setup?
A standard filter funnel (such as a standard Millipore filter funnel), a silicone rubber gasket, an off-the-shelf side-arm (Buchner or similar) filtration flask, and a vacuum pump.
Related Products
Flask, Thick Wall, W/Sidearm, 250ml · Tube, Rubber, F/Vacuum Filtration · Stand, Vacuum Filter Support, 1-Place SS · Portable Water Test Kit, Incubator Kit, Alone · Incubator, Portable, App. 1l, Mics Programme
Related Categories
Water Testing · Water and Sanitation · Water Treatment · Water Distribution-Fittings · Sanitation & Hygiene
Request a Quote
For pricing, bulk quantities or tender documentation on the Filter Support, Plastic, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.jpg)
