Electronic Sequencer with 4 mm Safety Sockets Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12753
Indian Lab Suppliers supplies the Electronic Sequencer with 4 mm Safety Sockets (Product ID: 12753) as part of its electronics engineering lab equipment range. It is a digital trainer with gates and D flip-flop memory modules for building sequential circuits with solderless 4 mm patch-cord connections.
Quick Answer
Four 2-input AND gates (7408), four 2-input OR gates (7432), six NOT gates (7404) and eight D flip-flop memory modules (7474) are wired to 4 mm brass sockets, so students build counters, registers and sequencers without soldering. Six debounced logic switches set TTL High/Low inputs and eight LEDs show outputs. A 5 V, 500 mA regulated supply is internally connected, and a set of 20 coloured multi-strand patch cords with stackable 4 mm plugs and an instruction manual are supplied. It works from 230 V ±10% single-phase AC and is housed in a finished box.
Key Specifications
| Parameter | Detail |
|---|---|
| Gates | 4 × 2-input AND (7408), 4 × 2-input OR (7432), 6 × NOT (7404) |
| Memory modules | 8 D flip-flops (7474) |
| Logic inputs | 6 debounced High/Low switches |
| Output indicators | 8 LEDs |
| Internal supply | 5 V DC, 500 mA |
| Mains | 230 V ±10%, single phase; power switch with indicator and fuse |
| Patch cords | 20, multi-strand, 4 mm stackable plugs |
| Manual | Instruction manual with experiments |
Where This Is Used
Used for elementary to advanced sequential-logic work; the Electronic Simulator with 4 mm Safety Sockets (Product ID: 12754) adds NAND/NOR gates, JK and RS flip-flops and a variable clock, while the Sequential Logic Tutor (Product ID: 12757) adds relays and timers. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Why are debounced switches used?
Mechanical switch bounce would otherwise clock flip-flops several times per press.
How many flip-flops are available?
Eight D flip-flops based on 7474.
How are connections made?
With 4 mm stackable patch cords, no soldering needed.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Electronic Sequencer with 4 mm Safety Sockets, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
 (1).png)
.png)