Car Electric Actuator Trainer Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-13818
Indian Lab Suppliers supplies the Car Electric Actuator Trainer (Product ID: 13818) as part of its electronics engineering lab equipment range. It is a trainer for measuring and analysing the control signals of engine-management actuators, with teacher-set faults and a student diagnosis panel.
Quick Answer
The injector drive can be varied for engine speeds of 900-6000 rpm with injection times of 2-12 ms, and the EGR valve signal has a duty cycle adjustable from 10 to 90%. A simulated common-rail injector allows pre-injection of 0.1-0.7 ms, injection delay of 0.7-4.5 ms and injection time of 0.2-1.8 ms at 15-80 Hz, with a 70 V opening pulse. The idle-control stepper motor has test points on each winding, a 5-50 Hz step frequency, four LEDs showing winding polarity, reversible direction and a millimetre scale. Faults include open, faulty, shorted-to-positive and shorted-to-earth actuators as well as starting, lighting, horn and loose-connection faults.
Key Specifications
| Parameter | Detail |
|---|---|
| Fuel injector | 900-6000 rpm, injection time 2-12 ms |
| EGR valve | Duty cycle 10-90% |
| Common-rail injector (simulated) | Pre-injection 0.1-0.7 ms, delay 0.7-4.5 ms, injection 0.2-1.8 ms, 15-80 Hz, 70 V opening pulse |
| Idle stepper motor | 5-50 Hz, 4 winding LEDs, reversible, mm scale |
| Other systems | Starting, charging, ignition, accessories |
| Test sockets | 2 mm |
| Display | Coloured schematic with 5 LED locators |
| PSU input | 220-230 V AC, 50 Hz, single phase |
| PSU outputs | 1.3-24 V DC 1 A; 24-0-24 V AC 0.5 A; +5 V DC 2 A; +12 V DC 2 A; -12 V DC 1 A |
Where This Is Used
It is used with an oscilloscope or multimeter in automobile electronics labs to study ECU output signals. The general electrical fault board is Car Electric Trouble Shooting Trainer (Product ID: 13817). The common-rail injector circuit uses a 70 V pulse; switch off before touching its terminals. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
Which actuators can be analysed?
Fuel injector, EGR valve, simulated common-rail injector and idle stepper motor.
What actuator faults can be set?
Open circuit, faulty actuator, short to positive and short to earth.
What supply does it need?
220-230 V AC, 50 Hz single phase for the power supply unit.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Car Electric Actuator Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)