Binary to Decimal Encoder Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-12692
Indian Lab Suppliers supplies the Binary to Decimal Encoder (Product ID: 12692) as part of its electronics engineering lab equipment range. It converts a 4-bit binary (BCD) code into a decimal digit shown on a seven-segment display.
Quick Answer
A selector switch sets digits 0 to 9, and four LEDs show the matching binary code A, B, C, D; an unknown 4-bit code can also be fed in and its decimal value read on the display. The conversion is done by a BCD-to-seven-segment decoder/driver, and a DPDT switch runs a lamp test that lights every segment. In circuit terms this is a decoding operation. An internal IC-regulated 5 V supply is built in, and the board runs from 230 V ±10%, 50 Hz mains with fuse and jewel light. Operating instructions with theory and report suggestions, and 4 mm stackable patch cords, are supplied.
Key Specifications
| Parameter | Detail |
|---|---|
| Input | 4-bit binary (BCD) code |
| Display | Seven-segment, 0 to 9 |
| Decoder | BCD-to-7-segment decoder/driver |
| Input setting | Selector switch 0–9 with binary indicator; external code input |
| Other controls | DPDT lamp-test switch |
| Internal supply | 5 V DC, 50 mA |
| Mains supply | 230 V ±10%, 50 Hz |
Where This Is Used
Used in code-conversion practicals with the Decimal to BCD Converter (Product ID: 12706), which works in the opposite direction. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What range of digits is displayed?
0 to 9.
What is the lamp test for?
It lights all segments to check the display.
Can an unknown code be tested?
Yes, a 4-bit code can be fed in and read as a decimal digit.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a quote: Contact Us or Tenders.
.png)
.jpg)
.jpg)
.png)