Home » Our Product » Electronics Engineering Lab Equipments » Basic Electricity and Electronics

Basic Electricity and Electronics Manufacturer,Supplier and Exporter in India

Product Code : SCL-EELE-12839

Indian Lab Suppliers supplies the Basic Electricity and Electronics (Product ID: 12839) as part of its electronics engineering lab equipment range. It is a rack-mounted modular lab for basic electrical laws, AC and three-phase measurement and introductory electronics.

Quick Answer

Eight ABS/MS panels with mimic diagrams sit on a 40 × 40 mm aluminium profile rack with a flat worktop panel and space to hang a PC monitor, and every input and output ends in a 4 mm shrouded banana socket. A programmable DC supply up to 50 V / 5 A with sweep, CC/CV protection and LCD readout of volts, amps and watts powers the experiments, alongside fixed voltages. Peripheral modules include resistor, potentiometer, capacitor-inductor, AC voltage and transformer banks, a bridge module, a programmable RLC load bank (inductive steps 0-0.75-3 H), a logic-gate unit, and a bar magnet and compass. The three-phase meter panel works at 415 V, so connections must be made with supplies off and under supervision.

Key Specifications

Parameter	Detail
Frame	40 × 40 mm aluminium profile rack, flat worktop panel, monitor mounting option
Panels	8 ABS/MS panels with mimic diagrams; 4 mm shrouded banana sockets
DC supply	Programmable, up to 50 V / 5 A, sweep, CC/CV, LCD V/I/W
Measuring panel	3-phase 3/4-wire multifunction meter, 415 V, 5 A CT input: V, I, Hz, PF, kVA, kW, kWh
Variac panel	Single-phase 0-230 V, 3 A variac; 200 VA transformer, 0-220 V primary and secondary
Load bank	Single-phase RLC; programmable inductive 0-0.75-3 H; programmable capacitive
Logic unit	Input switches, line driver, AND, NAND, OR, EX-OR, inverter
Optional	Networked multifunction measurement module (50 MHz, 14-bit); please confirm at quotation

Where This Is Used

Covers electrical laws, DC, AC and three-phase systems, voltage-, temperature- and light-dependent resistors, diodes, transistors, thyristors, amplifiers, op-amps and power supply circuits in first-year engineering and polytechnic labs; see also the Electrical Basic Principle Trainer (Product ID: 12840) and the Electrical and Electronic System Trainer (Product ID: 12860). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.

Frequently Asked Questions

What DC supply is built in?
A programmable supply up to 50 V / 5 A with sweep and CC/CV protection.

Which logic gates are included?
AND, NAND, OR, EX-OR and inverter, with input switches and a line driver.

Are an oscilloscope and function generator included?
They appear in the learning objectives but are not listed as supplied; please confirm at quotation.