Analog and Digital Trainer Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12081
Indian Lab Suppliers supplies the Analog and Digital Trainer (Product ID: 12081) as part of its electronics engineering lab equipment range. It is an all-in-one breadboard trainer with power supplies, a function generator and logic input/output aids for building analog and digital circuits.
Quick Answer
Fixed ±5 V and ±12 V DC outputs and a dual variable 0 to +30 V / 0 to −30 V supply (all 500 mA) sit beside 5-0-5 V and 12-0-12 V AC outputs. The function generator gives sine (0–6 Vpp, 1 Hz–1 MHz), triangle (0–6 Vpp, 1 Hz–300 kHz), square (0–5 Vpp, 1 Hz–400 kHz) and 5 V TTL (1 Hz–1 MHz) outputs. For digital work there are toggle data switches, two debounced pulse switches with inverting and non-inverting outputs, a 16-bit LED display, a two-digit seven-segment display and 40-, 28- and 20-pin ZIF sockets. An 8 Ω, 0.5 W speaker, 1 kΩ and 10 kΩ potentiometers and a four-channel adaptor with banana and BNC sockets complete the panel. Mains supply details are not stated, so please confirm them at quotation.
Key Specifications
| Parameter | Detail |
|---|---|
| Fixed DC | ±5 V, ±12 V at 500 mA |
| Variable DC | Dual 0 to +30 V and 0 to −30 V at 500 mA |
| AC outputs | 5-0-5 V, 12-0-12 V |
| Sine / triangle | 0–6 Vpp; 1 Hz–1 MHz / 1 Hz–300 kHz |
| Square / TTL | 0–5 Vpp, 1 Hz–400 kHz / 5 V, 1 Hz–1 MHz |
| Logic aids | Data switches, 2 debounced pulse switches, 16-bit LED display, 2-digit 7-segment display |
| Other | 8 Ω 0.5 W speaker, 1 kΩ and 10 kΩ pots, 4-channel banana/BNC adaptor |
| Sockets | ZIF 40, 28 and 20 pin; solderless breadboard |
Where This Is Used
Used as a general bench trainer in diploma and degree electronics labs, replacing separate supplies and generators for breadboard work; single-topic boards such as the Digital IC Trainer (Product ID: 12080) and Op-Amp Trainer (Product ID: 12076) go deeper. Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What frequency range does the generator cover?
Sine and TTL outputs run from 1 Hz to 1 MHz; triangle to 300 kHz and square to 400 kHz.
Are AC supplies included?
Yes, 5-0-5 V and 12-0-12 V AC.
Are the pulse switches debounced?
Yes, both give clean inverting and non-inverting pulses.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a quote: Contact Us or Tenders.
.png)
.png)
.png)
.png)
.png)