60 Hz Clock Pulse Generator (Using IC 5369) Manufacturer,Supplier and Exporter in India
Product Code : SCL-EELE-12741
Indian Lab Suppliers supplies the 60 Hz Clock Pulse Generator (Using IC 5369) (Product ID: 12741) as part of its electronics engineering lab equipment range. Students build a crystal-controlled 60 Hz time base with IC 5369 and divide it down to 10 Hz and 1 Hz.
Quick Answer
IC 5369 is a precision time-base IC for digital clocks: it divides the 3.58 MHz crystal frequency to a steady 60 Hz output. Two decade counter ICs then divide this by 6 to give 10 Hz and by 10 again to give 1 Hz, and all three outputs can be observed at panel sockets. The board has a 5 V DC, 50 mA regulated supply and runs from 230 V ±10%, 50 Hz mains, with operating instructions covering theory and design.
Key Specifications
| Parameter | Detail |
|---|---|
| Experiment | Construction of 60 Hz, 10 Hz and 1 Hz clock outputs |
| Time-base IC | 5369 precision time base for digital clock |
| Crystal | 3.58 MHz |
| Dividers | 2 decade counter ICs |
| Internal supply | 5 V DC, 50 mA, IC regulated |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse and jewel light |
Where This Is Used
Used to show how digital clocks and timers get an accurate seconds pulse; related boards are the Construction of Multivibrators using Digital IC (Product ID: 12730) and the Decoding and Display of the Output from IC 7490 (Product ID: 12750). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Why use a crystal?
A quartz crystal gives a far more stable frequency than an RC oscillator.
Which outputs are available?
60 Hz, 10 Hz and 1 Hz.
Does the 60 Hz output depend on the 50 Hz mains?
No, it is derived from the crystal, not from the mains frequency.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the 60 Hz Clock Pulse Generator (Using IC 5369), reach our team via Contact Us or submit your requirement through our Tenders page.
