Pressure Transducer Trainer Manufacturer,Supplier and Exporter in India
.jpg)
Product Code : SCL-EELE-13319
Indian Lab Suppliers supplies the Pressure Transducer Trainer (Product ID: 13319) as part of its electronics engineering lab equipment range. It shows how a pressure transducer converts air pressure in a vessel to an electrical signal, with on/off control and USB data logging.
Quick Answer
A foot pump charges a pressure vessel (0–100 psi) fitted with a safety valve, a non-return valve, a manual valve and a 0–150 psi gauge, linked by 1.5 m hoses. A 0–100 psi differential-input pressure transducer feeds a 0–10 V digital voltmeter and a V-I converter (0–5 V DC in, 4–20 mA out), so students can compare the gauge reading with the electrical output. A built-in on/off controller sounds a buzzer and lights an LED at a set pressure, and a USB link to PC software plots transducer characteristics and allows printouts. The mains rating is not listed, so please confirm it at quotation. Do not pressurise the vessel beyond 100 psi, check the safety valve before use and wear eye protection.
Key Specifications
| Parameter | Detail |
|---|---|
| Transducer | 0–100 psi, differential input |
| Gauge | 0–150 psi |
| Vessel and safety valve | 0–100 psi |
| Valves and hoses | Non-return valve, manual valve; 1.5 m hoses |
| Pump | Foot pump, 0–150 psi |
| Signal conversion | V-I converter: 0–5 V DC in, 4–20 mA out |
| Indicators | 5 V DC buzzer and LED (on/off controller) |
| Meter and PC link | Digital voltmeter 0–10 V; USB interface with software |
Where This Is Used
Used in instrumentation and process-control labs to teach pressure sensing and 4–20 mA signalling. Related: Water Level Measurement Trainer (Using Inductive & Capacitive Transducer) (Product ID: 13301) and Measurement and Control of Temperature Using RTD Transducer (C.R.) (Product ID: 13309). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
What output signal is available?
A 4–20 mA current from the V-I converter as well as a voltage.
How is pressure applied?
With a foot pump into the pressure vessel.
Can data be logged on a PC?
Yes, through the USB interface and software.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Pressure Transducer Trainer, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.jpg)
.png)
.png)
.png)