New Energy Vehicle Lighting System Training Platform Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13535
Indian Lab Suppliers supplies the New Energy Vehicle Lighting System Training Platform (Product ID: 13535) as part of its electronics engineering lab equipment range. It is a floor-standing panel carrying the interior and exterior lighting circuits of a pure-electric car, with a fault setter and test terminals.
Quick Answer
Built on the lighting system of a production pure-electric car, the panel carries the battery, ignition switch, relays, body control module, instrument cluster, combination and headlight switches, headlamp and tail lamp assemblies, hazard switch, indicators, fog lamps, reversing and brake light switches, reading lamps and number-plate lamp. Faults are set from a fault setter, and students measure live signals at the matching terminals on the detection panel. Fault exercises cover low and high beam, side lamps, indicators and hazard lamps, fog, reading, brake and reversing lamps. It runs from 220 V AC 50 Hz with 12 V DC circuits.
Key Specifications
| Parameter | Detail |
|---|---|
| Overall size | 1500 × 700 × 1700 mm |
| Teaching panel | 1400 × 730 × 4 mm |
| Input | 220 V AC, 50 Hz |
| Working voltage | 12 V DC |
| Fault simulation | Built-in fault setter with detection terminals |
| Training areas | Body electrics, exterior and interior lighting, central electrical control, fuses and relays |
Where This Is Used
It is used for body-electrics and lighting diagnosis lessons, and it is also needed to run the New Energy Vehicle Comfort System Training Platform (Product ID: 13536). For conventional cars see the External Light System Teaching Board (Product ID: 13582). Keep the 220 V input earthed. Browse the full Electronics Engineering Lab Equipment range or related Engineering Lab Equipment products.
Frequently Asked Questions
How are faults created?
With the fault setter on the platform.
Where are measurements taken?
At the detection terminals on the panel, matched to each circuit.
What supply does it need?
220 V AC, 50 Hz; the lighting circuits run at 12 V DC.
Related Categories
Electronics Engineering Lab Equipment · Engineering Lab Equipment · Electronics Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the New Energy Vehicle Lighting System Training Platform, reach our team via Contact Us or submit your requirement through our Tenders page.
 (1).jpeg)
.jpg)
.jpeg)
 (1).jpg)
 Trainer (2).jpg)