Measurement of Angular Displacement Using Potentiometric (Resistive) and Capacitive Transducer & Study their Characteristics Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-13302
Indian Lab Suppliers supplies the Measurement of Angular Displacement Using Potentiometric (Resistive) and Capacitive Transducer & Study their Characteristics (Product ID: 13302) as part of its electronics engineering lab equipment range. It measures angular displacement with a potentiometric (resistive) transducer and a capacitive transducer and compares their characteristics.
Quick Answer
Turning each transducer changes its resistance or capacitance, and the circuit converts that change into a voltage shown on a 3½-digit display in degrees. Both transducers are graduated in ten 100° steps (1000° in total as listed), so students plot output against angle to check linearity; please confirm the angular range at quotation. A 1 kHz sine oscillator (0–4 Vpp) excites the capacitive transducer, and the board has ±12 V, 100 mA IC-regulated supplies and test points. It runs on 230 V AC ±10%, 50 Hz and weighs about 2 kg.
Key Specifications
| Parameter | Detail |
|---|---|
| Transducers | Potentiometric (resistive) and capacitive, ten 100° steps |
| Oscillator | 1 kHz sine, 0–4 Vpp |
| Display | 3½-digit DPM, degrees |
| Internal supply | ±12 V DC, 100 mA, IC regulated |
| Accessories | 4 mm patch cords, 50 cm: 2 red, 2 black |
| Mains | 230 V AC ±10%, 50 Hz |
| Size and weight | 340 x 125 x 210 mm (W x H x D), about 2 kg |
Where This Is Used
Used in transducer and instrumentation labs. For linear displacement see the Displacement Measurement Using Inductive & Capacitive Pick-up System (Product ID: 13304) and the Displacement Measurement Trainer Using LDR, Photo Transistor and Photo Diode Setup (Product ID: 13303). Browse the full Electronics Engineering Lab Equipment range or related Electronics Lab Equipment products.
Frequently Asked Questions
Why does the capacitive transducer need an oscillator?
Capacitance is measured with an AC signal, here a 1 kHz sine wave.
What is displayed?
Angular displacement in degrees on a 3½-digit meter.
Which two transducers are compared?
A potentiometric (resistive) and a capacitive transducer.
Related Categories
Electronics Engineering Lab Equipment · Electronics Lab Equipment · Engineering Lab Equipment
Request a Quote
For pricing, bulk quantities or tender documentation on the Measurement of Angular Displacement Using Potentiometric (Resistive) and Capacitive Transducer & Study their Characteristics, reach our team via Contact Us or submit your requirement through our Tenders page.
.jpg)
.png)
 (1).jpg)
.png)
.png)
.jpg)
.jpg)