Integrating System Using Junction Diode with power supply and 1 meter Manufacturer,Supplier and Exporter in India
.png)
Product Code : SCL-EELE-12217
Indian Lab Suppliers supplies the Integrating System Using Junction Diode with power supply and 1 meter (Product ID: 12217) as part of its electronics engineering lab equipment range. It is a board that uses a junction diode and a capacitor to integrate trains of voltage pulses, showing how charge builds up step by step.
Quick Answer
Three experiments are listed: charging a capacitor through the diode with unidirectional varying pulses, with alternating pulses and with sinusoidal pulses, and integrating each series. A built-in pulse generator gives switch-selectable pulse type and shape, so the experiments need no manual switching; alternatively an external rheostat can be used with the on-board 12 V DC, 100 mA IC-regulated supply. A mains transformer provides 4.5, 5, 6 and 9 V AC tappings at 100 mA, and a 0–15 V AC/DC voltmeter reads the capacitor voltage. A silicon junction diode, push-to-ON switch and toggle switch are fitted; a metronome is needed for timing, and the rheostat is optional.
Key Specifications
| Parameter | Detail |
|---|---|
| Pulse generator | Unidirectional varying / alternating pulses, switch-selectable type and shape |
| AC source | Transformer taps 0, 4.5, 5, 6, 9 V AC at 100 mA |
| DC supply | 12 V DC at 100 mA, IC regulated (for rheostat method) |
| Voltmeter | AC/DC, 0–15 V, 65 mm dial |
| Components | Silicon junction diode, push-to-ON switch, toggle switch |
| Mains | 230 V ±10%, 50 Hz AC; ON/OFF switch, fuse, jewel light |
| Also required | Metronome; rheostat (optional) |
Where This Is Used
Used in 10+2 and B.Sc. physics practicals on capacitor charging and rectification. Related: Study of R-C Circuits with Varying EMF power supply and 1 digital dual range meter (Product ID: 12241) and Reactive Elements & Time Dependent Network Analysis with power supply and 1 multi range meter (Product ID: 12208). Browse the full Electronics Engineering Lab Equipment range or related Physics Lab Equipment products.
Frequently Asked Questions
What does the diode do here?
It lets current flow one way, so each pulse adds charge to the capacitor.
Is a pulse source built in?
Yes, with selectable pulse type and shape.
What else is needed?
A metronome; a rheostat is optional.
Related Categories
Electronics Engineering Lab Equipment · Physics Lab Equipment · Electricity and Magnetism
Request a Quote
For pricing, bulk quantities or tender documentation on the Integrating System Using Junction Diode with power supply and 1 meter, reach our team via Contact Us or submit your requirement through our Tenders page.
.png)
.png)
.png)
.jpg)
.png)
.jpg)